Accessories for Traceable Duct Rods & Push Cables

Equip your traceable rods for peak performance: durable fittings for stronger pulling, smoother feeding and reliable signal transmission in everyday field work.

  • Matched pulling heads, end fittings & thread adapters
  • Sonde adapters for 512/640 Hz & 33 kHz
  • Guide & protection cones for bends and entries

Pulling Head with Eye for 4.5 mm (micro) Fibreglass Rods (M5)
Pulling Head with Eye for 4.5 mm (micro) Fibreglass Rods (M5)
Pulling head with eye for inserting into ducts, suitable for 4.5 mm (micro) fibreglass rods. It is screwed onto the front ferrule and features an M5 thread.
 
Product No.: GVG0
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: 5-15 Working days or at stock 5-15 Working days or at stock
(abroad may vary)
Show product
Starting Head with Eye for 4.5 mm (M5)
Starting Head with Eye for 4.5 mm (M5)
Starting head with eye for 4.5 mm for inserting into pipes. Screws onto the starting sleeve of glass fibre rods, M5 thread.
 
Product No.: GVFOO
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: 5-15 Working days or at stock 5-15 Working days or at stock
(abroad may vary)
Show product
Starting Head with Eye for 6mm (M6)
Starting Head with Eye for 6mm (M6)
Starting head with eye for 6mm for insertion into pipes. For screwing onto the starting sleeve of fibreglass rods, M6 thread.
 
Product No.: GVS0
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: 5-15 Working days or at stock 5-15 Working days or at stock
(abroad may vary)
Show product
Starting Head with Eye for 7.5mm–11mm (M12)
Starting Head with Eye for 7.5mm–11mm (M12)
Starting head with eye for 7.5mm–11mm for insertion into pipes. Screws onto the starting sleeve of fibreglass rods, M12 thread.
 
Product No.: GVM120G
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: 5-15 Working days or at stock 5-15 Working days or at stock
(abroad may vary)
Show product
Starting Head with Shackle for 4,5 mm (M5)
Starting Head with Shackle for 4,5 mm (M5)
Starting head with shackle for 4.5 mm for insertion into pipes. Screws onto the starting sleeve of fibreglass rods, M5 thread.
 
Product No.: GVFOOGGR
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: 5-15 Working days or at stock 5-15 Working days or at stock
(abroad may vary)
Show product
Starting Head with Shackle for 6 mm (M6)
Starting Head with Shackle for 6 mm (M6)
Starting head with shackle for 6 mm for insertion into pipes. Screws onto the starting sleeve of fibreglass rods, M6 thread.
 
Product No.: GVSOGGR
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: 5-15 Working days or at stock 5-15 Working days or at stock
(abroad may vary)
Show product
Starting Head with Shackle for 7.5 mm–11 mm (M12)
Starting Head with Shackle for 7.5 mm–11 mm (M12)
Starting head with shackle for 7.5 mm–11 mm for insertion into pipes. Screws onto the starting sleeve of fibreglass rods, M12 thread.
 
Product No.: GVM120GGR
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: 5-15 Working days or at stock 5-15 Working days or at stock
(abroad may vary)
Show product
Starting Head with Rollers for 6mm (M6)
Starting Head with Rollers for 6mm (M6)
Starting head with rollers for 6mm for insertion into pipes. Screws onto the starting sleeve of fibreglass rods, M6 thread.
 
Product No.: GVSOGRO
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: 5-15 Working days or at stock 5-15 Working days or at stock
(abroad may vary)
Show product
Starting Head with Rollers 7.5mm–11mm (M12)
Starting Head with Rollers 7.5mm–11mm (M12)
Starting head with rollers for 7.5mm–11mm for insertion into pipes. Screws onto the starting sleeve of fibreglass rods, M12 thread.
 
Product No.: GVM120GRO
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: 5-15 Working days or at stock 5-15 Working days or at stock
(abroad may vary)
Show product
Connection M6 – M10 for COBRA
Connection M6 – M10 for COBRA
Threaded connection for adapting 6 mm (M6) COBRA fibreglass rods to an M10 probe connection, suitable for S13, S18, standard probe, ultra probe and super probe.
 
Product No.: GVADM6IM10I
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: 5-15 Working days or at stock 5-15 Working days or at stock
(abroad may vary)
Show product
Connection M12 to M10 for COBRA
Connection M12 to M10 for COBRA
Threaded connection M12 to M10 to adapt COBRA fibreglass rods (7.5 mm–11 mm) to probes such as S13, S18, standard probe, ultra probe, and super probe.
 
Product No.: JMSADM12M10
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: 5-15 Working days or at stock 5-15 Working days or at stock
(abroad may vary)
Show product
Swivel Coupling Connection (M6)
Swivel Coupling Connection (M6)
Swivel coupling with M6 thread for joining two fibreglass rods securely.
 
Product No.: GVM6GG
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: 5-15 Working days or at stock 5-15 Working days or at stock
(abroad may vary)
Show product
Product No.: COV910
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: 5-7 Days 5-7 Days
(abroad may vary)
Show product
1 to 13 (from a total of 13)

Why accessories matter

The right accessories extend reach, improve handling and ensure high locating quality. Robust pulling heads and adapters secure the connection, while sonde adapters place the signal exactly where you need it.

Typical components

  • Pulling heads & end fittings: secure attachment for pulling and tracing tasks
  • Thread adapters: match different thread sizes and systems
  • Sonde adapters: interface for transmitters/sondes (e.g., 512/640 Hz, 33 kHz)
  • Guide & protection cones: reduce friction and protect at edges
  • Repair & splice kits: restore rods after jacket or fiber damage
  • Swivels: prevent torsion when pulling
  • Length counters & brakes: controlled feed and measurement
  • Connection & ground leads: stable signal injection and return

Selection guide

  • Compatibility: check thread size, diameter and maker specifications
  • Use case: consider bend radius, pipe material and depth
  • Signal path: choose accessories suited to the locating frequency

Pro tip: Keep a repair kit and spare tips on hand to minimize downtime on site.