Cable Pulling Technology & Pulling Aids

At SEMPERDEAL, you’ll find professional cable pulling technology and pulling aids for safe and efficient installation of cables and lines. Our tools are especially suited for electricians, telecoms, and utility networks.

Product Range & Variants

  • Pulling ropes & fiberglass rods – flexible yet strong
  • Pulling loops & tapes – for guiding cables through conduits and ducts
  • Pulling tools & accessories – such as guide eyes, end fittings, conduit guides

- Kopie
- Kopie
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
- Kopie
- Kopie
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
- Kopie
- Kopie
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Flexible tube coupling 16-15 mm
Flexible tube coupling 16-15 mm
Flexible tube coupling 16-15 mm as a standard accessory for the EZ15; enables blowing the pulling cord into flexible installation conduits (M16, M20, M25) in a coiled state up to 100 m.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Starting head with eye for 6mm (M6)
Starting head with eye for 6mm (M6)
Starting head with eye for 6mm for insertion into pipes. For screwing onto the starting sleeve of fibreglass rods, M6 thread.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Single cable pulling grip Ø20 - 30mm
Single cable pulling grip Ø20 - 30mm
Single cable pulling grip made of galvanised steel strands for cables with Ø20 - 30mm. The steel mesh with fitted thimble eye distributes the pulling load evenly across the strands and is designed for pulling in a single cable (grip length 1250mm, weight 0.5kg).
 
Prices are visible to registered users only.
EZ100 cord blowing device
Zeitler cord blowing device EZ-100
Cord blowing device for pulling and locating cords in micro-ducts (fibre-optic installation technology) for pipe inner diameters 6–40 mm. Supplied in a robust plastic case with extensive accessories; compressor (200–300 l/min) not included.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Special cord (Ø 4 mm, 210 kg)
Special cord (Ø 4 mm, 210 kg)
Special cord Ø 4 mm with a tensile strength of up to 210 kg; paraffin-coated, water-repellent and triple double-twisted. Supplied as a coreless spool with internal payout, suitable for EZ100 and EZ300.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Parachute for internal conduit ø 60-100 mm
Parachute for internal conduit ø 60-100 mm
Parachute for internal conduit ø 60-100 mm as a spare part; designed to facilitate blowing in the pulling cord in conduits with an inner diameter of 60–100 mm when shuttle deployment is not possible.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Element Set B
Element Set B
Element Set B spare part for the EZ50, designed for insertion of the special cord into pipes with 25–32 mm inner diameter; includes two ½“ reduction joints (25/19 mm) and internal 11.5 mm nozzle.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Cord stopper
Cord stopper
Cord stopper as a spare part for the EZ50; used to secure the special cord on the blowing system during the blowing process.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
- Kopie
- Kopie
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
- Kopie - Kopie
- Kopie - Kopie
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Starting head with eye for 7.5mm–11mm (M12)
Starting head with eye for 7.5mm–11mm (M12)
Starting head with eye for 7.5mm–11mm for insertion into pipes. Screws onto the starting sleeve of fibreglass rods, M12 thread.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Single cable pulling grip Ø30 - 40mm
Single cable pulling grip Ø30 - 40mm
Single cable pulling grip made of galvanised steel strands for cables with Ø30 - 40mm. The steel mesh with fitted thimble eye distributes the pulling load evenly across the strands and is designed for pulling in a single cable (grip length 1250mm, weight 0.5kg).
 
Prices are visible to registered users only.
Special cord (Ø 4 mm, 300 kg)
Special cord (Ø 4 mm, 300 kg)
Special cord Ø 4 mm with a tensile strength of up to 300 kg; paraffin-coated, water-repellent and triple double-twisted. Supplied as a coreless spool with internal payout, suitable for EZ100 and EZ300.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Parachute for internal conduit ø 100-150 mm
Parachute for internal conduit ø 100-150 mm
Parachute for internal conduit ø 100-150 mm as a spare part; designed to facilitate blowing in the pulling cord in conduits with 100–150 mm inner diameter when shuttle deployment is not possible.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Special nozzle black 25 to 50 mm
Special nozzle black 25 to 50 mm
Black special nozzle 25 to 50 mm as a spare part for the EZ50, for blowing the special cord into conduits with an inner diameter from 25 mm to 50 mm.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
21 to 40 (from a total of 112)

Why SEMPERDEAL?

✔ Wide selection of tested professional tools
✔ Fast shipping & free delivery on orders over €500
✔ Expert advice, demonstrations & training
✔ Quality trusted by trade professionals

Applications

Our cable pulling technology and pulling aids are ideal for electrical contractors, telecom operators, network providers and all professionals in **cable installation and conduit works**. Whether in ducts, pipes or trenches – with SEMPERDEAL you operate efficiently, safely, and precisely.