Cable Pulling Technology & Pulling Aids

At SEMPERDEAL, you’ll find professional cable pulling technology and pulling aids for safe and efficient installation of cables and lines. Our tools are especially suited for electricians, telecoms, and utility networks.

Product Range & Variants

  • Pulling ropes & fiberglass rods – flexible yet strong
  • Pulling loops & tapes – for guiding cables through conduits and ducts
  • Pulling tools & accessories – such as guide eyes, end fittings, conduit guides

Single cable pulling grip Ø120 - 150mm
Single cable pulling grip Ø120 - 150mm
Single cable pulling grip made of galvanised steel strands for cables with Ø120 - 150mm. The steel mesh with fitted thimble eye distributes the pulling load evenly across the strands and is designed for pulling in a single cable (grip length 1500mm, weight 2.2kg).
 
Prices are visible to registered users only.
Orange Cone 50 – 120 mm
Orange Cone 50 – 120 mm
Orange cone 50 – 120 mm as a standard accessory for the EZ100; suitable for applications with poor conduit access or irregular conduit ends.

 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Foam Ring ø 140 mm
Foam Ring ø 140 mm
Foam ring ø 140 mm as a spare part for the EZ100. An intact foam front provides improved sealing and facilitates blowing in the special cord.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Locating Rod Ø9.0 mm / 120 lm Black
Locating Rod Ø9.0 mm / 120 lm Black
Mobile version with integrated copper conductor and 1 start bulb incl. shackle

Reel diameter 1000 mm, hot-dip galvanized
Push cable diameter 9.0 mm
Start/end sleeve thread M12
Tensile strength 340 kg
Bending radius 620 mm
Push cable length 120 m
Weight 31.3 kg
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Replacement Duct Rod Ø 9 mm / 120 running meters, black
Replacement Duct Rod Ø 9 mm / 120 running meters, black
With integrated copper strand; M12 threaded start and end ferrules; tensile strength 340 kg; bending radius 620 mm; push rod length 120 m; weight 11.3 kg.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Connection M12 to M10 for COBRA
Connection M12 to M10 for COBRA
Threaded connection M12 to M10 to adapt COBRA fibreglass rods (7.5 mm–11 mm) to probes such as S13, S18, standard probe, ultra probe, and super probe.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Triple cable pulling grip Ø20 - 30mm
Triple cable pulling grip Ø20 - 30mm
Triple cable pulling grip made of galvanised steel strands (steel mesh) with a fitted thimble eye for even load distribution when pulling in cables. For cable diameter Ø20 - 30mm, grip length 1250mm. For pulling in three cables.
 
Prices are visible to registered users only.
Adapter 140 mm
Adapter 140 mm
Adapter 140 mm as a standard accessory for EZ100 and EZ300; front section designed for blowing the cord into conduits with inner diameters up to Ø 130 mm.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Foam Ring with Carrier Disc
Foam Ring with Carrier Disc
Foam ring with carrier disc as a spare part for the EZ100; Ø 140 mm with replaceable front. Art. No.: 100279.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Rodding Snake Ø11.0 mm / 150 lm Blue
Rodding Snake Ø11.0 mm / 150 lm Blue
Mobile version with 1 start bulb incl. shackle

Reel diameter 1000 mm, hot-dip galvanized
Push cable diameter 11.0 mm
Start/end sleeve thread M12
Tensile strength 500 kg
Bending radius 770 mm
Push cable length 150 m
Weight 43 kg
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Replacement Duct Rod Ø11 mm / 150 lfm blue
Replacement Duct Rod Ø11 mm / 150 lfm blue
Replacement duct rod made of fiberglass composite material with a high-strength plastic sheath. Designed for high mechanical loads during locating and pulling operations.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Triple cable pulling grip Ø30 - 40mm
Triple cable pulling grip Ø30 - 40mm
Triple cable pulling grip made of galvanised steel strands (steel mesh) with a fitted thimble eye for even load distribution when pulling in cables. For cable diameter Ø30 - 40mm, grip length 1250mm.
 
Prices are visible to registered users only.
Adapter 200 mm
Adapter 200 mm
Adapter 200 mm as a standard accessory for EZ100 and EZ300; front section designed for blowing the cord into conduits with inner diameters from Ø 130 mm to Ø 200 mm.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Complete Front Section
Complete Front Section
Complete front section with cord channel as a spare part for the EZ100; Recommended replacement in the event of more extensive damage to the front section when replacement of the foam ring (Art. No. 100049) alone is not sufficient.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Locating Rod Ø11.0 mm / 150 lm Black
Locating Rod Ø11.0 mm / 150 lm Black
Mobile version with integrated copper conductor and 1 start bulb incl. shackle

Reel diameter 1000 mm, hot-dip galvanized
Push cable diameter 11.0 mm
Start/end sleeve thread M12
Tensile strength 500 kg
Bending radius 770 mm
Push cable length 150 m
Weight 43 kg
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Replacement Duct Rod Ø11 mm / 150 lfm black
Replacement Duct Rod Ø11 mm / 150 lfm black
Replacement fiberglass rodder made of composite material with a high-strength plastic sheath and integrated copper conductor for locating applications. Designed for high mechanical loads and use with cable and line locating equipment.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Swivel Coupling Connection (M6)
Swivel Coupling Connection (M6)
Swivel coupling with M6 thread for joining two fibreglass rods securely.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Triple cable pulling grip Ø30 - 40mm
Triple cable pulling grip Ø30 - 40mm
Triple cable pulling grip made of galvanised steel strands (steel mesh) with a fitted thimble eye for even load distribution when pulling in cables. For cable diameter Ø30 - 40mm, grip length 1250mm, number of pull cables 3. For pulling in three cables.
 
Prices are visible to registered users only.
Hose Flange
Hose Flange
Hose flange as a standard accessory for the EZ100; enables operation in water-filled chambers when used in combination with the air hose (Art. 100120).
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Rodding Snake Ø11.0 mm / 200 lm Blue
Rodding Snake Ø11.0 mm / 200 lm Blue
Mobile version with 1 start bulb incl. shackle

Reel diameter 1000 mm, hot-dip galvanized
Push cable diameter 11.0 mm
Start/end sleeve thread M12
Tensile strength 500 kg
Bending radius 770 mm
Push cable length 200 m
Weight 50 kg
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
81 to 100 (from a total of 112)

Why SEMPERDEAL?

✔ Wide selection of tested professional tools
✔ Fast shipping & free delivery on orders over €500
✔ Expert advice, demonstrations & training
✔ Quality trusted by trade professionals

Applications

Our cable pulling technology and pulling aids are ideal for electrical contractors, telecom operators, network providers and all professionals in **cable installation and conduit works**. Whether in ducts, pipes or trenches – with SEMPERDEAL you operate efficiently, safely, and precisely.