Cable & Pipe Locators – locate utilities with confidence

Our cable & pipe locators help you trace buried utilities quickly and safely. Systems combine a transmitter and receiver for active locating and offer field-ready features like depth indication and directional guidance.

  • Active locating: Apply signals via direct connection or induction
  • Versatile tasks: Trace metallic lines and locate sondes in non-metallic ducts
  • Fault finding: Optional A-frame to pinpoint sheath/insulation faults

Smart Marker SM 1500 for Telephone
Smart Marker SM 1500 for Telephone
Color: Orange
Frequency: 101.4 kHz
Application: Telephone
Installation Depth: up to 1.5 m
RFID Chip: Yes

The MiM Smart Marker SM 1500 is a disc marker from Komplex. Each Smart Marker has a unique RFID to allow clear identification. Passive markers make it possible to electrically mark utility points. The “disc” is placed horizontally above the utility point that needs to be marked.
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Locating Rod Ø4.5 mm / 60 lm Black
Locating Rod Ø4.5 mm / 60 lm Black
Standard version with integrated copper conductor and 1 start bulb incl. eyelet

Reel diameter 330 mm, hot-dip galvanized
Push cable diameter 4.5 mm
Start/end sleeve thread M5
Tensile strength 170 kg
Bending radius 310 mm
Push cable length 60 m
Weight 4.4 kg
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Replacement Locating Duct Rod Ø4.5 mm / 60 lfm black
Replacement Locating Duct Rod Ø4.5 mm / 60 lfm black
Replacement locating duct rod with integrated copper conductor for precise locating applications.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
SuperCAT4 and T1 Transmitter Configurator
SuperCAT4 and T1 Transmitter Configurator
Configure your SuperCAT4 and T1 transmitter device combination.

With this system, you are safe on every construction site. With the SuperCAT4, all cables can be located passively. In combination with the T1 transmitter, cables can also be energized directly or inductively to locate even hard-to-find cables.

The system consists of:
 
  • SuperCAT4 (of your choice)
  • T1 transmitter (of your choice)
  • Standard connection set for transmitter
  • Equipment bag
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
LMX100 Basic Ground Radar 250MHz
LMX100 Basic Ground Radar 250MHz
LMX100 basic ground radar

Easy-to-use ground radar system from Radiodetection for locating buried cable and pipeline routes down to 600cm depth. The 250MHz frequency signal enables detection of installations with diameters from approx. 70mm up to more than 400mm. Radar signals are displayed as hyperbolas on the high-resolution colour screen.

- frame unit with radar antenna
- 4x standard wheels
- high-resolution display
- battery case
- charger
- operating manual
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Starting Head with Eye for 6mm (M6)
Starting Head with Eye for 6mm (M6)
Starting head with eye for 6mm for insertion into pipes. For screwing onto the starting sleeve of fibreglass rods, M6 thread.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Receive Clamp 100 mm
Receive Clamp 100 mm
Used with a locating receiver to identify individual utility lines, often in densely packed areas.
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Li-Ion Battery Pack incl. Charger
Li-Ion Battery Pack incl. Charger
For Tx transmitters

This kit includes a Li-ion battery pack and a universal charger for the Tx transmitter.
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Li-Ion Battery Pack
Li-Ion Battery Pack
For RD 7000 / 7100 / 7200 / 8000 / 8100 / 8200

This is a replacement Li-ion battery pack for RDXX00 receivers.
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
MAR 100-3D for Wastewater
MAR 100-3D for Wastewater
Color: Green
Frequency: 121.6 kHz
Application: Wastewater
Installation depth: up to 1.5 m

The MAR 100-3D is a ball marker from Komplex and enables utility points to be electrically marked. The “ball” is placed above the utility point to be marked. The built-in transmitting coil inside the marker automatically aligns itself.
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
MiM Marker 120 for Wastewater
MiM Marker 120 for Wastewater
Color: Green
Frequency: 121.6 kHz
Application: Wastewater
Installation depth: up to 1.4 m

The MiM Marker 120 is a disc marker from Komplex and enables utility points to be electrically marked. The “disc” is placed horizontally above the utility point to be marked.
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Marker 2500 für Abwasser
Marker 2500 für Abwasser
Color: Green
Frequency: 121.6 kHz
Application: Wastewater
Installation Depth: up to 1.8 m

The Marker 2500 is a disc marker from Komplex and is specifically designed for deep utility routes. Passive markers make it possible to electrically mark utility points. The “disc” is placed horizontally above the utility point that needs to be marked.
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Rodding Snake Ø6.0 mm / 60 lm Blue
Rodding Snake Ø6.0 mm / 60 lm Blue
Standard version with 1 start bulb incl. eyelet

Reel diameter 550 mm, hot-dip galvanized
Push cable diameter 6.0 mm
Start/end sleeve thread M6
Tensile strength 230 kg
Bending radius 400 mm
Push cable length 60 m
Weight 8.3 kg
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Replacement Frame Ø630 mm
Replacement Frame Ø630 mm
Standard version
Push cable diameter 7.5mm
Capacity 30-100m
Weight 5.5kg
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Replacement Duct Rod Ø 6 mm / 60 running meters, blue
Replacement Duct Rod Ø 6 mm / 60 running meters, blue
M6 threaded start and end ferrules; tensile strength 230 kg; bending radius 400 mm; push rod length 60 m; weight 2.4 kg.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
LMX150 Professional System (500 MHz)
LMX150 Professional System (500 MHz)
LMX150 Professional System (500MHz)

Easy-to-use ground radar system from Radiodetection for locating buried cable and pipe routes up to a laying depth of 200cm. The 500MHz frequency signal enables the detection of installations with diameters from approx. 25mm to greater than 300mm. The received radar signals are displayed on the high-resolution color display, in the basic version as a hyperbola curve. By setting trigger and comparison hyperbolas, the soil type and moisture can be adjusted.


- Frame assembly with radar antenna
* 4x standard wheels
* High-resolution display
* Battery case
* Charger
* Operating manual
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Micro Sonde S6 33kHz
Micro Sonde S6 33kHz
  • Frequency 33kHz
  • Locating depth up to 2m
  • Sonde diameter 6.4mm
  • Sonde length 105mm
  • Thread connection M5 (Female)
  • Power supply: 1x CR425
  • Sonde type: With spring joint
Delivery incl. batteries
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Starting Head with Eye for 7.5mm–11mm (M12)
Starting Head with Eye for 7.5mm–11mm (M12)
Starting head with eye for 7.5mm–11mm for insertion into pipes. Screws onto the starting sleeve of fibreglass rods, M12 thread.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
OMNI-Marker II for undefined
OMNI-Marker II for undefined
Color: purple
Frequency: 66.4kHz
Application: undefined
Laying depth: up to 1.5m

The OMNI-Marker II is a spherical marker from Tempo® used to electrically mark utility points. The sphere is placed above the point to be marked. The built-in transmitting coil inside the marker automatically aligns itself.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Receive Clamp 130mm
Receive Clamp 130mm
Used with a locating receiver to identify individual utility lines, often in densely packed areas.
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
61 to 80 (from a total of 237)

How to choose the right locator

  • Use case: Route tracing, service drops or pinpoint fault locating
  • Frequencies & screens: Select operating frequencies and views (e.g. guidance/peak) for your environment
  • Accessories: Induction clamp for contactless coupling, sondes for non-metallic ducts, A-frame for faults
  • Documentation: Consider depth readout and logging if required

Safety & practice

Always locate before you dig, mark the path and verify depth. Watch for interference and adapt your locating strategy when signals are ambiguous.