Cable & Pipe Locators – locate utilities with confidence

Our cable & pipe locators help you trace buried utilities quickly and safely. Systems combine a transmitter and receiver for active locating and offer field-ready features like depth indication and directional guidance.

  • Active locating: Apply signals via direct connection or induction
  • Versatile tasks: Trace metallic lines and locate sondes in non-metallic ducts
  • Fault finding: Optional A-frame to pinpoint sheath/insulation faults

C.A.T4+ Cable Locator with StrikeAlert and Carry Bag
C.A.T4+ Cable Locator with StrikeAlert and Carry Bag
Construction industry
Receiver with audible and visual indication; depth measurement is pre-installed (only works in combination with a Genny transmitter or a sonde).

Passive frequencies for line locating: 50Hz and Radio; active frequencies: 33/131kHz; supplied incl. batteries
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Mini Sonde S9 33kHz
Mini Sonde S9 33kHz
  • Frequency 33kHz
  • Locating depth up to 4m
  • Sonde diameter 9mm
  • Sonde length 138mm
  • Thread connection M6 (female)
  • Power supply: 1x CR535
  • Sonde type: With spring joint
Delivery incl. batteries
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Ground Spike for Genny4 Transmitter
Ground Spike for Genny4 Transmitter
The ground spike is used to ground the Genny transmitter.
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Transmitter Clamp 50 mm for Genny4 Sender
Transmitter Clamp 50 mm for Genny4 Sender
This clamp is used to inductively couple a Genny signal onto a specific conductor. It is particularly useful when direct signal coupling is not possible, or on live cables that cannot be de-energized.
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Carrying Bag for Cable Locators (Receivers)
Carrying Bag for Cable Locators (Receivers)
Padded carrying bag for transporting cable locating devices (receivers). Suitable for C.A.T4, SuperC.A.T4 and RD312.
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Standard Sonde (Channel Sonde) 33kHz
Standard Sonde (Channel Sonde) 33kHz
  • Frequency 33kHz
  • Location depth up to 5m
  • Sonde diameter 39mm
  • Sonde length 168mm
  • Connection thread M10 (male)
  • Power supply: 1x AA
  • Sonde type: Rigid
Delivery incl. batteries
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Grounding cable 10 m on reel (yellow)
Grounding cable 10 m on reel (yellow)
The 10m cable on a practical cable reel is used to extend the ground lead of the direct-connection cable when no accessible or suitable grounding point is available on site.
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Connection M6 – M10 for COBRA
Connection M6 – M10 for COBRA
Threaded connection for adapting 6 mm (M6) COBRA fibreglass rods to an M10 probe connection, suitable for S13, S18, standard probe, ultra probe and super probe.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
S18A Small Sonde with End Cap 33 kHz
S18A Small Sonde with End Cap 33 kHz
  • Frequency 33kHz
  • Locating depth up to 4m
  • Sonde diameter 18mm
  • Sonde length 82mm
  • Thread connection M10 (male)
  • Power supply: 2× CR1/3N or 1× D1/3N
  • Sonde type: Rigid
Delivery incl. batteries
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Batteries for Minisonde S9 (10 pieces)
Batteries for Minisonde S9 (10 pieces)
Battery 10x CR535
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
EML Markermate 100 Marker Locator Device
EML Markermate 100 Marker Locator Device

Locator device for all common passive markers (disc-shaped or spherical)

Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
CAT4+ and Genny4 Configurator
CAT4+ and Genny4 Configurator

Configure your Genny4 and CAT4+ device combination.

With this system, you are safe on every construction site. With the CAT4, all cables can be located passively. In combination with the Genny4 transmitter, cables can also be energized directly or inductively to locate even hard-to-find cables.

The system consists of:
 

  • C.A.T4 (of your choice)
  • Genny4 transmitter
  • Standard connection set for transmitter
  • Equipment bag
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
MicroProbe PL18-33 (M10 and M12)
MicroProbe PL18-33 (M10 and M12)
  • Frequency 33kHz
  • Locating depth up to 10m
  • Probe diameter 18mm
  • Probe length 85mm
  • Connection thread M12 (Female) and M10 (Male)
  • Power supply: 1x LS14250
  • Probe type: Rigid
Delivery incl. batteries
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Carrying Bag for the C.A.T4 / Genny4 System and the SuperC.A.T4 / T1
Carrying Bag for the C.A.T4 / Genny4 System and the SuperC.A.T4 / T1
This padded bag can store a C.A.T/Genny or SuperC.A.T4/T1 transmitter and their accessories.
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Pulling Head with Eye for 4.5 mm (micro) Fibreglass Rods (M5)
Pulling Head with Eye for 4.5 mm (micro) Fibreglass Rods (M5)
Pulling head with eye for inserting into ducts, suitable for 4.5 mm (micro) fibreglass rods. It is screwed onto the front ferrule and features an M5 thread.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
C.A.T4+ Cable Locator
-15%
C.A.T4+ Cable Locator
Construction industry
Receiver with audible and visual indication; depth measurement is prepared (works only in combination with a Genny transmitter or a sonde).

Passive frequencies for utility locating: 50Hz and Radio; active frequencies: 33/131kHz; delivery includes batteries
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Omni Marker II for Fiber Optics
Omni Marker II for Fiber Optics
Color: yellow / black
Frequency: 92.0kHz
Application: fiber optics
Burial depth: up to 1.5m

The OMNI-Marker II is a spherical marker from Tempo® used to electrically mark line points. The sphere is placed above the point to be marked and the integrated transmitting coil inside the marker automatically aligns itself.

 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
221 to 237 (from a total of 237)

How to choose the right locator

  • Use case: Route tracing, service drops or pinpoint fault locating
  • Frequencies & screens: Select operating frequencies and views (e.g. guidance/peak) for your environment
  • Accessories: Induction clamp for contactless coupling, sondes for non-metallic ducts, A-frame for faults
  • Documentation: Consider depth readout and logging if required

Safety & practice

Always locate before you dig, mark the path and verify depth. Watch for interference and adapt your locating strategy when signals are ambiguous.