Cable & Pipe Locators – locate utilities with confidence

Our cable & pipe locators help you trace buried utilities quickly and safely. Systems combine a transmitter and receiver for active locating and offer field-ready features like depth indication and directional guidance.

  • Active locating: Apply signals via direct connection or induction
  • Versatile tasks: Trace metallic lines and locate sondes in non-metallic ducts
  • Fault finding: Optional A-frame to pinpoint sheath/insulation faults

RD8200 and Tx Transmitter Configurator
RD8200 and Tx Transmitter Configurator
Configure your RD8200 and Tx transmitter device combination.

With this system, you are safe on every construction site. With the RD8200, all cables can be located passively. In combination with the Tx transmitter, cables can also be energized directly or inductively to locate even hard-to-find cables.

The system consists of:
 
  • RD8200 (of your choice)
  • Tx transmitter (of your choice)
  • Standard connection set for transmitter
  • Equipment bag
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
MicroProbe MPL9-33 (M5 and M6)
MicroProbe MPL9-33 (M5 and M6)
  • Frequency 33kHz
  • Locating depth up to 5.7m
  • Probe diameter 9.0mm
  • Probe length 138mm
  • Connection thread M6 and M5 (Female)
  • Power supply: 1x BR535
  • Probe type: With spring joint
Delivery incl. batteries
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Ground Spike for Transmitters T1, Tx-1, Tx-5, Tx-10
Ground Spike for Transmitters T1, Tx-1, Tx-5, Tx-10
Provides a reliable grounding point for the return path of the locating signal.
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Large Receive Antenna with Flexible Handle
Large Receive Antenna with Flexible Handle
The receive antenna has a long, flexible handle that allows you to identify and assign hard-to-reach cable bundles in ducts and shafts.
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Li-Ion Universal Charger
Li-Ion Universal Charger
For Tx transmitters

Charges a Li-Ion battery pack for the Tx transmitter via a 220V mains supply (90–240 VAC).
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Li-Ion Car Charger 12V
Li-Ion Car Charger 12V
For RD 7000 / 7100 / 7200 / 8000 / 8100 / 8200

Charges a Li-Ion battery pack for an RDXX00 receiver via a 12V vehicle power outlet.
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Rodding Snake Ø9.0 mm / 80 lm Blue
Rodding Snake Ø9.0 mm / 80 lm Blue
Mobile version with 1 start bulb incl. shackle

Reel diameter 790 mm, hot-dip galvanized
Push cable diameter 9.0 mm
Start/end sleeve thread M12
Tensile strength 340 kg
Bending radius 620 mm
Push cable length 80 m
Weight 22.5 kg
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Replacement Duct Rod Ø 9 mm / 80 running meters, blue
Replacement Duct Rod Ø 9 mm / 80 running meters, blue
M12 threaded start and end ferrules; tensile strength 340 kg; bending radius 620 mm; push rod length 80 m; weight 7.5 kg.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Transport Case LMX100, LMX150 and LMX200
Transport Case LMX100, LMX150 and LMX200
Transport case LMX100, LMX150 and LMX200

Robust and rollable transport case for the LMX ground penetrating radar family from RADIODETECTION as well as Sensors & Software. The case is used for the safe transport of the radar system including accessories. Additionally, a bag for the display and small parts is included.
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Probe PL18-05 (M10 and M12)
Probe PL18-05 (M10 and M12)
  • Frequency 512Hz
  • Locating depth up to 5.3m (for iron pipes)
  • Probe diameter 18mm
  • Probe length 85mm
  • Connection thread M12 (Female) and M10 (Male)
  • Power supply: 1x LS14250
  • Probe type: Rigid
Delivery incl. batteries
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Omni Marker II for Gas
Omni Marker II for Gas
Color: Yellow
Frequency: 83.0kHz
Application: Gas
Bury depth: up to 1.5m

The OMNI-Marker II is a ball-shaped marker by Tempo® designed for marking utility points. The built-in transmission coil automatically aligns itself once placed above the marking point.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Starting Head with Rollers for 6mm (M6)
Starting Head with Rollers for 6mm (M6)
Starting head with rollers for 6mm for insertion into pipes. Screws onto the starting sleeve of fibreglass rods, M6 thread.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Transmitter Tx-5
Transmitter Tx-5
5W transmitter for professional use. With 16 active and 8 inductive frequencies, the Tx-5B transmitter offers higher power and greater induction capability, as well as Fault Find (sheath fault locating).

Scope of delivery:
 
  • Tx-5 transmitter
  • Standard connection set
  • Earth stake
  • Batteries
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
STR Receive Antenna
STR Receive Antenna
It is used with CD-equipped receivers to locate and identify individual cables using the CD signal from a Tx-10(B) transmitter. LEDs and directional arrows indicate the CD signal current direction.
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Li-Ion Car Charger 12V
Li-Ion Car Charger 12V
For Tx transmitters

Charges a Li-Ion battery pack for the Tx transmitter via a 12V vehicle power outlet.
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Locating Rod Ø9.0 mm / 80 lm Black
Locating Rod Ø9.0 mm / 80 lm Black
Mobile version with integrated copper conductor and 1 start bulb incl. shackle

Reel diameter 790 mm, hot-dip galvanized
Push cable diameter 9.0 mm
Start/end sleeve thread M12
Tensile strength 340 kg
Bending radius 620 mm
Push cable length 80 m
Weight 22.5 kg
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Replacement Duct Rod Ø 9 mm / 80 running meters, black
Replacement Duct Rod Ø 9 mm / 80 running meters, black
Replacement duct rod Ø 9 mm with integrated copper strand; M12 threaded start and end ferrules; tensile strength 340 kg; bending radius 620 mm; push rod length 80 m; weight 7.5 kg.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Transport Case For LMX100/200 Display
Transport Case For LMX100/200 Display

Robust transport case for the display of the LMX100/200 ground penetrating radar system.

Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Cable and Sonde Locator SuperC.A.T4+ S
-17%
Cable and Sonde Locator SuperC.A.T4+ S
Water and Pipeline Industry
For locating sondes used for non-metallic pipe systems.

Designed for use in the demanding environments of the construction industry, this locator can be combined with a wide range of sondes and accessories.
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Ground cable 10 m on reel (yellow) with magnetic contact
Ground cable 10 m on reel (yellow) with magnetic contact
The 10 m long cable on a practical reel is used to extend the ground lead of the direct connection cable when no accessible or suitable grounding point is available on site. Includes magnetic contact.
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
121 to 140 (from a total of 237)

How to choose the right locator

  • Use case: Route tracing, service drops or pinpoint fault locating
  • Frequencies & screens: Select operating frequencies and views (e.g. guidance/peak) for your environment
  • Accessories: Induction clamp for contactless coupling, sondes for non-metallic ducts, A-frame for faults
  • Documentation: Consider depth readout and logging if required

Safety & practice

Always locate before you dig, mark the path and verify depth. Watch for interference and adapt your locating strategy when signals are ambiguous.