Duct Rods & Sewer Sondes – push rods, sondes & accessories

Push rods position the sonde at the target point; the sonde emits a locating signal that a surface receiver tracks with depth readout. Choose rods with suitable diameter/bend radius and sondes with the right frequency for your network.

  • Push/traceable rods: durable rods with connection options for tight bends and long runs
  • Sonde frequencies: common 512 Hz for sewer/non-metallic lines; alternate bands for specific environments
  • Adapters & springs: M-thread (e.g. M8/M10) for flexible, shock-absorbing coupling
  • Power & spares: batteries and accessories to keep kits field-ready

Probe PL18-05 (M10 and M12)
Probe PL18-05 (M10 and M12)
  • Frequency 512Hz
  • Locating depth up to 5.3m (for iron pipes)
  • Probe diameter 18mm
  • Probe length 85mm
  • Connection thread M12 (Female) and M10 (Male)
  • Power supply: 1x LS14250
  • Probe type: Rigid
Delivery incl. batteries
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Starting Head with Rollers for 6mm (M6)
Starting Head with Rollers for 6mm (M6)
Starting head with rollers for 6mm for insertion into pipes. Screws onto the starting sleeve of fibreglass rods, M6 thread.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Locating Rod Ø9.0 mm / 80 lm Black
Locating Rod Ø9.0 mm / 80 lm Black
Mobile version with integrated copper conductor and 1 start bulb incl. shackle

Reel diameter 790 mm, hot-dip galvanized
Push cable diameter 9.0 mm
Start/end sleeve thread M12
Tensile strength 340 kg
Bending radius 620 mm
Push cable length 80 m
Weight 22.5 kg
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Replacement Duct Rod Ø 9 mm / 80 running meters, black
Replacement Duct Rod Ø 9 mm / 80 running meters, black
Replacement duct rod Ø 9 mm with integrated copper strand; M12 threaded start and end ferrules; tensile strength 340 kg; bending radius 620 mm; push rod length 80 m; weight 7.5 kg.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Starting Head with Rollers 7.5mm–11mm (M12)
Starting Head with Rollers 7.5mm–11mm (M12)
Starting head with rollers for 7.5mm–11mm for insertion into pipes. Screws onto the starting sleeve of fibreglass rods, M12 thread.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Rodding Snake Ø9.0 mm / 120 lm Blue
Rodding Snake Ø9.0 mm / 120 lm Blue
Mobile version with 1 start bulb incl. shackle

Reel diameter 1000 mm, hot-dip galvanized
Push cable diameter 9.0 mm
Start/end sleeve thread M12
Tensile strength 340 kg
Bending radius 620 mm
Push cable length 120 m
Weight 31.3 kg
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Replacement Duct Rod Ø 9 mm / 120 running meters, blue
Replacement Duct Rod Ø 9 mm / 120 running meters, blue
M12 threaded start and end ferrules; tensile strength 340 kg; bending radius 620 mm; push rod length 120 m; weight 11.3 kg.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Connection M6 – M10 for COBRA
Connection M6 – M10 for COBRA
Threaded connection for adapting 6 mm (M6) COBRA fibreglass rods to an M10 probe connection, suitable for S13, S18, standard probe, ultra probe and super probe.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Locating Rod Ø9.0 mm / 120 lm Black
Locating Rod Ø9.0 mm / 120 lm Black
Mobile version with integrated copper conductor and 1 start bulb incl. shackle

Reel diameter 1000 mm, hot-dip galvanized
Push cable diameter 9.0 mm
Start/end sleeve thread M12
Tensile strength 340 kg
Bending radius 620 mm
Push cable length 120 m
Weight 31.3 kg
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Replacement Duct Rod Ø 9 mm / 120 running meters, black
Replacement Duct Rod Ø 9 mm / 120 running meters, black
With integrated copper strand; M12 threaded start and end ferrules; tensile strength 340 kg; bending radius 620 mm; push rod length 120 m; weight 11.3 kg.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
S18A Small Sonde with End Cap 33 kHz
S18A Small Sonde with End Cap 33 kHz
  • Frequency 33kHz
  • Locating depth up to 4m
  • Sonde diameter 18mm
  • Sonde length 82mm
  • Thread connection M10 (male)
  • Power supply: 2× CR1/3N or 1× D1/3N
  • Sonde type: Rigid
Delivery incl. batteries
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Connection M12 to M10 for COBRA
Connection M12 to M10 for COBRA
Threaded connection M12 to M10 to adapt COBRA fibreglass rods (7.5 mm–11 mm) to probes such as S13, S18, standard probe, ultra probe, and super probe.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Rodding Snake Ø11.0 mm / 150 lm Blue
Rodding Snake Ø11.0 mm / 150 lm Blue
Mobile version with 1 start bulb incl. shackle

Reel diameter 1000 mm, hot-dip galvanized
Push cable diameter 11.0 mm
Start/end sleeve thread M12
Tensile strength 500 kg
Bending radius 770 mm
Push cable length 150 m
Weight 43 kg
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Replacement Duct Rod Ø11 mm / 150 lfm blue
Replacement Duct Rod Ø11 mm / 150 lfm blue
Replacement duct rod made of fiberglass composite material with a high-strength plastic sheath. Designed for high mechanical loads during locating and pulling operations.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
MicroProbe PL18-33 (M10 and M12)
MicroProbe PL18-33 (M10 and M12)
  • Frequency 33kHz
  • Locating depth up to 10m
  • Probe diameter 18mm
  • Probe length 85mm
  • Connection thread M12 (Female) and M10 (Male)
  • Power supply: 1x LS14250
  • Probe type: Rigid
Delivery incl. batteries
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
S18B Small Sonde with Long End Cap 33kHz
S18B Small Sonde with Long End Cap 33kHz
  • Frequency 33kHz
  • Locating depth up to 4m
  • Probe diameter 18mm
  • Probe length 173mm
  • Connection thread M10 (Male)
  • Power supply: 2x CR1/3N or 1x D1/3N
  • Probe type: Rigid
Delivery incl. batteries
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Locating Rod Ø11.0 mm / 150 lm Black
Locating Rod Ø11.0 mm / 150 lm Black
Mobile version with integrated copper conductor and 1 start bulb incl. shackle

Reel diameter 1000 mm, hot-dip galvanized
Push cable diameter 11.0 mm
Start/end sleeve thread M12
Tensile strength 500 kg
Bending radius 770 mm
Push cable length 150 m
Weight 43 kg
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Replacement Duct Rod Ø11 mm / 150 lfm black
Replacement Duct Rod Ø11 mm / 150 lfm black
Replacement fiberglass rodder made of composite material with a high-strength plastic sheath and integrated copper conductor for locating applications. Designed for high mechanical loads and use with cable and line locating equipment.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Bendisonde 512Hz
Bendisonde 512Hz
  • Frequency 512Hz
  • Locating depth up to 6m (for iron pipes)
  • Sonde diameter 23mm
  • Sonde length 478mm
  • Thread connection M10 (male)
  • Power supply: 1x AA
  • Sonde type: With 2 spring joints
Delivery incl. batteries
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Swivel Coupling Connection (M6)
Swivel Coupling Connection (M6)
Swivel coupling with M6 thread for joining two fibreglass rods securely.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
41 to 60 (from a total of 75)

Selection guide

  • Task: Route tracing, blockage pinpointing, verifying branches/service laterals.
  • Rod & length: Match rod diameter/length to pipe size, bend radius and distance.
  • Frequency plan: Use 512 Hz as a sewer standard; switch bands if interference occurs.
  • Interfaces: Choose M-thread adapters (e.g. M8/M10) to fit your sonde and reel.

Field tip

Cross-check the route and confirm depth on the receiver. If signals are noisy, change frequency or adjust the coupling point.