Tools for Valve, Hydrant and Sewer Maintenance

SEMPERDEAL supplies professional tools for everyday jobs in utility and sewer works. Designed to make valve, hydrant and manhole tasks faster and safer on site.

  • Valve keys: Accurate operation of shut-off and control valves
  • Hydrant & service keys: Robust tools for utilities and waterworks
  • Manhole cover lifters: Ergonomic systems for safe handling of heavy lids
  • Cable installation & accessories: Pulling, guiding and protection—job proven

Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Suction base
Suction base
Suction base accessory for the EZ50 cord blowing device – enables suction of the special cord when blowing in is no longer possible.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
- Kopie - Kopie
- Kopie - Kopie
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
- Kopie - Kopie - Kopie - Kopie
- Kopie - Kopie - Kopie - Kopie
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Replacement duct rod Ø 7.5 mm / 70 running meters, blue
Replacement duct rod Ø 7.5 mm / 70 running meters, blue
M12 threaded start and end ferrules; tensile strength 290 kg; bending radius 500 mm; push rod length 70 m; weight 4.5 kg.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
12mm threaded key
12mm threaded key
To open manhole covers with M12 thread


Areas of application
 
  • Wastewater sector
  • Pest control
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
T-handle Key
T-handle Key
The T-handle key is specially designed for opening manhole covers with special locking mechanisms.

Weight: approx. 1 kg
Rod length: approx. 50 cm
Material: steel, galvanized
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Starting head with shackle for 6 mm (M6)
Starting head with shackle for 6 mm (M6)
Starting head with shackle for 6 mm for insertion into pipes. Screws onto the starting sleeve of fibreglass rods, M6 thread.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Single cable pulling grip Ø50 - 60mm
Single cable pulling grip Ø50 - 60mm
Single cable pulling grip made of galvanised steel strands for cables with Ø50 - 60mm. The steel mesh with fitted thimble eye distributes the pulling load evenly across the strands and is designed for pulling in a single cable (grip length 1250mm, weight 1.2kg).
 
Prices are visible to registered users only.
Locating cord (Ø 4 mm, 210 kg)
Locating cord (Ø 4 mm, 210 kg)
Locating cord Ø 4 mm with integrated copper strand and a tensile strength of up to 210 kg; paraffin-coated, water-repellent and triple double-twisted. Supplied as a coreless spool with internal payout, suitable for EZ100 and EZ300.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Foam insert ø 170 mm
Foam insert ø 170 mm
Foam insert ø 170 mm as a special accessory for the EZ100; larger foam surface for improved sealing at conduit inner diameters from approximately 130–150 mm.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Insert nozzle with 90° angle
Insert nozzle with 90° angle
Insert nozzle with 90° angle for Zeitler cord blowing devices (EZ-50, EZ-100, EZ-300) to facilitate blowing pulling/locating cords into pipelines with tight bends.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
- Kopie - Kopie - Kopie
- Kopie - Kopie - Kopie
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
- Kopie - Kopie - Kopie - Kopie - Kopie
- Kopie - Kopie - Kopie - Kopie - Kopie
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Starting head with shackle for 7.5 mm–11 mm (M12)
Starting head with shackle for 7.5 mm–11 mm (M12)
Starting head with shackle for 7.5 mm–11 mm for insertion into pipes. Screws onto the starting sleeve of fibreglass rods, M12 thread.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Single cable pulling grip Ø60 - 80mm
Single cable pulling grip Ø60 - 80mm
Single cable pulling grip made of galvanised steel strands for cables with Ø60 - 80mm. The steel mesh with fitted thimble eye distributes the pulling load evenly across the strands and is designed for pulling in a single cable (grip length 1500mm, weight 1.2kg).
 
Prices are visible to registered users only.
Foam adapter ø 200 mm
Foam adapter ø 200 mm
Foam adapter ø 200 mm as a special accessory for the EZ100; larger foam surface for improved sealing with conduit inner diameters from approximately 140 mm to 180 mm.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Front plate with ring
Front plate with ring
Front plate with ring as a spare part for the Zeitler EZ50 cord blowing device, designed to accommodate inserts for different pipe inner diameters.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
- Kopie - Kopie - Kopie
- Kopie - Kopie - Kopie
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
101 to 120 (from a total of 169)

Why SEMPERDEAL tools?

  • Field-ready: Ergonomic handling, secure grip, clear markings
  • Durable: Jobsite-grade materials with service-friendly design
  • Efficient: Smart details for quicker workflows and clean results

Find the right tool fast

  • Define the task: Operate, lift, pull, test or service
  • Check interfaces: Sizes, fit and system compatibility
  • Handling & protection: Prefer secure grip and protective caps, use bags/cases for transport

Pro tip

Create standardized team kits with identical loadouts and labeling to reduce search time and keep equipment deployment-ready.