Tools for Valve, Hydrant and Sewer Maintenance

SEMPERDEAL supplies professional tools for everyday jobs in utility and sewer works. Designed to make valve, hydrant and manhole tasks faster and safer on site.

  • Valve keys: Accurate operation of shut-off and control valves
  • Hydrant & service keys: Robust tools for utilities and waterworks
  • Manhole cover lifters: Ergonomic systems for safe handling of heavy lids
  • Cable installation & accessories: Pulling, guiding and protection—job proven

Operating Key A
Operating Key A
Small operating key for above-ground hydrants with approx. 1.5 kg weight, made to DIN 3223 standard.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Operating key C 1100, KOS
Operating key C 1100, KOS
Operating key C 1100, KOS for opening and closing underground hydrants; manufactured from high-quality galvanized steel, made in Germany.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Starting Head with Eye for 7.5mm–11mm (M12)
Starting Head with Eye for 7.5mm–11mm (M12)
Starting head with eye for 7.5mm–11mm for insertion into pipes. Screws onto the starting sleeve of fibreglass rods, M12 thread.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Single cable pulling grip Ø30 - 40mm
Single cable pulling grip Ø30 - 40mm
Single cable pulling grip made of galvanised steel strands for cables with Ø30 - 40mm. The steel mesh with fitted thimble eye distributes the pulling load evenly across the strands and is designed for pulling in a single cable (grip length 1250mm, weight 0.5kg).
 
Prices are visible to registered users only.
SIGA® Safety Key D
SIGA® Safety Key D
SIGA® safety key D is coated with a spark-free metal alloy and equipped with a non-slip rubber handle and an extension guard. It is suitable for fittings from DN10 to DN900 and, with an undamaged coating, can be used in Ex-protected areas.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Special Cord (Ø 4 mm, 300 kg)
Special Cord (Ø 4 mm, 300 kg)
Special cord Ø 4 mm with a tensile strength of up to 300 kg; paraffin-coated, water-repellent and triple double-twisted. Supplied as a coreless spool with internal payout, suitable for EZ100 and EZ300.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Parachute for Internal Conduit ø 100-150 mm
Parachute for Internal Conduit ø 100-150 mm
Parachute for internal conduit ø 100-150 mm as a spare part; designed to facilitate blowing in the pulling cord in conduits with 100–150 mm inner diameter when shuttle deployment is not possible.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
2 Long Beads Ø11–17 mm
2 Long Beads Ø11–17 mm
For EZ50
Standard accessory

Scope of delivery: 1 pack with 2 pcs.

Insertion bead specially designed for flexible ducts.

Depending on pipe diameter and distance, the use of an insertion bead as a transport aid is recommended.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Special Nozzle black 25 to 50 mm
Special Nozzle black 25 to 50 mm
Black special nozzle 25 to 50 mm as a spare part for the EZ50, for blowing the special cord into conduits with an inner diameter from 25 mm to 50 mm.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Locating Rod Ø6.0 mm / 60 lm Black
Locating Rod Ø6.0 mm / 60 lm Black
Standard version with integrated copper conductor and 1 start bulb incl. eyelet

Reel diameter 550 mm, hot-dip galvanized
Push cable diameter 6.0 mm
Start/end sleeve thread M6
Tensile strength 230 kg
Bending radius 400 mm
Push cable length 60 m
Weight 8.3 kg
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Replacement Frame Ø790mm
Replacement Frame Ø790mm
Version with wheels
Push cable diameter 9.0mm
Capacity 40-80m
Weight 15kg
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Replacement Locating Duct Rod Ø6 mm / 60 lfm black
Replacement Locating Duct Rod Ø6 mm / 60 lfm black
Replacement locating duct rod with integrated copper conductor for locating applications.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
10mm Threaded Key
10mm Threaded Key

To open manhole covers with M10 thread

Areas of application
 

  • Wastewater sector
  • Pest control
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
EZ100 cord blowing device
Zeitler Cord Blowing Device EZ-300 with two-stroke Engine
Cord blowing device EZ-300 with two-stroke engine for inserting or sucking in pulling cords up to 300 kg tensile strength in pipe inner diameters 25–200 mm, no compressor needed; with robust plastic case, 5 shuttle sets and extensive accessories.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Hand Hook
Hand Hook
Hand hook for opening various manhole covers and valve caps.

Weight: approx. 1–1.4 kg
Material: steel, galvanized
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Operating Key B
Operating Key B
Operating key B for above-ground hydrants (large), galvanized steel version, DIN 3223 certified, weight approx. 2 kg.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Operating key E750, VAS
Operating key E750, VAS
Operating key E750, VAS for opening and closing underground hydrants; manufactured from high-quality galvanized steel, made in Germany.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Starting Head with Shackle for 4,5 mm (M5)
Starting Head with Shackle for 4,5 mm (M5)
Starting head with shackle for 4.5 mm for insertion into pipes. Screws onto the starting sleeve of fibreglass rods, M5 thread.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Single cable pulling grip Ø40 - 50mm
Single cable pulling grip Ø40 - 50mm
Single cable pulling grip made of galvanised steel strands for cables with Ø40 - 50mm. The steel mesh with fitted thimble eye distributes the pulling load evenly across the strands and is designed for pulling in a single cable (grip length 1250mm, weight 1.0kg).
 
Prices are visible to registered users only.
Special Cord (Ø 4 mm, 210 kg, with length marking)
Special Cord (Ø 4 mm, 210 kg, with length marking)
Special cord Ø 4 mm with length marking and a tensile strength of up to 210 kg; paraffin-coated, water-repellent and triple double-twisted. Supplied as a coreless spool with internal payout, suitable for EZ100 and EZ300.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
81 to 100 (from a total of 170)

Why SEMPERDEAL tools?

  • Field-ready: Ergonomic handling, secure grip, clear markings
  • Durable: Jobsite-grade materials with service-friendly design
  • Efficient: Smart details for quicker workflows and clean results

Find the right tool fast

  • Define the task: Operate, lift, pull, test or service
  • Check interfaces: Sizes, fit and system compatibility
  • Handling & protection: Prefer secure grip and protective caps, use bags/cases for transport

Pro tip

Create standardized team kits with identical loadouts and labeling to reduce search time and keep equipment deployment-ready.