Cable Pulling Technology & Pulling Aids

At SEMPERDEAL, you’ll find professional cable pulling technology and pulling aids for safe and efficient installation of cables and lines. Our tools are especially suited for electricians, telecoms, and utility networks.

Product Range & Variants

  • Pulling ropes & fiberglass rods – flexible yet strong
  • Pulling loops & tapes – for guiding cables through conduits and ducts
  • Pulling tools & accessories – such as guide eyes, end fittings, conduit guides

Symbolic image of plastic rope
100 m synthetic rope for capstan winch with two eyes
100 m robust synthetic rope for capstan winches with two pre-terminated eyes. Breaking load 1,900 kg and approx. 10 mm diameter – ideal for pulling and winching tasks where a lightweight, high-strength rope is needed.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Mobile reel for synthetic rope
Mobile reel for synthetic rope
Mobile reel with a basket diameter of approx. 690 mm for the safe storage and payout of pulling ropes from capstan winches – ideal for neatly winding and providing synthetic ropes.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Pulling head with eye for 4.5 mm (micro) fibreglass rods (M5)
Pulling head with eye for 4.5 mm (micro) fibreglass rods (M5)
Pulling head with eye for inserting into ducts, suitable for 4.5 mm (micro) fibreglass rods. It is screwed onto the front ferrule and features an M5 thread.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Single cable pulling grip Ø8 - 15mm
Single cable pulling grip Ø8 - 15mm
Single cable pulling grip made of galvanised steel strands for cables with Ø8 - 15mm. The steel mesh with fitted thimble eye distributes the pulling load evenly across the strands and is designed for pulling in a single cable (grip length 1250mm, weight 0.4kg).

 
Prices are visible to registered users only.
Zeitler cord blowing device EZ-15
Zeitler cord blowing device EZ-15
Cord blowing device for pulling cords and locating cords in micro-ducts (fibre-optic installation technology) for pipe inner diameters 4–20 mm. Operated with a standard compressor (200–300 l/min, not included). Supplied in a robust plastic case incl. connectors, compressed-air hose, accessories, 4 reels of special cord and operating manual.


NOTE: Supplied without standard compressor (air delivery rate 200–300 l/h)

 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Special cord (Ø 1 mm, 24 kg)
Special cord (Ø 1 mm, 24 kg)
Special cord Ø 1 mm with a tensile strength of up to 24 kg; paraffin-coated, water-repellent and double double-twisted. Supplied as a coreless spool with internal payout, suitable for EZ15, EZ50, EZ100 and EZ300.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
10 pcs Lubri balls
10 pcs Lubri balls
Lubri balls as a spare part; used to blow cable lubricant into the interior of the conduit with the cord brake tightened. 10 pcs
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shuttle complete set for EZ100 (up to NW150 mm) and EZ300 (up to NW200 mm)
Shuttle complete set for EZ100 (up to NW150 mm) and EZ300 (up to NW200 mm)
Shuttle complete set for EZ100 (up to NW150 mm) and EZ300 (up to NW200 mm) including mini case, 4 black shuttle discs for standard application, 4 white shuttle discs for water expulsion and calibration, and 2 axles.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
PW400 capstan winch – cable pulling winch
PW400 cable pulling winch – capstan winch with petrol engine
PW400 cable pulling winch with petrol engine as a complement to Zeitler cord blowing devices; enables low-effort pulling of cables into conduit systems with a pulling force of up to 400 kg.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Symbolic image of plastic rope
350 m synthetic rope for capstan winch with two eye loops
350 m synthetic rope for capstan winches with two eye loops; breaking load 1900 kg, rope diameter approx. 10 mm.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Symbolic image of plastic rope
500 m synthetic rope for capstan winch with two eye loops
500 m synthetic rope for capstan winches with two eye loops; breaking load 1900 kg, rope diameter approx. 10 mm.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Starting head with eye for 4.5 mm (M5)
Starting head with eye for 4.5 mm (M5)
Starting head with eye for 4.5 mm for inserting into pipes. Screws onto the starting sleeve of glass fibre rods, M5 thread.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Single cable pulling grip Ø15 - 20mm
Single cable pulling grip Ø15 - 20mm
Single cable pulling grip made of galvanised steel strands for cables with Ø15 - 20mm. The steel mesh with fitted thimble eye distributes the pulling load evenly across the strands and is designed for pulling in a single cable (length 1250mm, number of cables 1).
 
Prices are visible to registered users only.
EZ50 cord blowing device
Zeitler cord blowing device EZ-50
Cord blowing device for pre-tension cords and locating cords in underground- or wall-laid conduit systems. For inner diameters 18–50 mm, blowing lengths up to 300 m (depending on pipe conditions). Can also be used to suck in the pulling cord if required; supplied in a plastic case incl. accessories.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Locating cord (Ø 1 mm, 24 kg)
Locating cord (Ø 1 mm, 24 kg)
Locating cord Ø 1 mm with an integrated copper strand and a tensile strength of up to 24 kg; paraffin-coated, water-repellent and double double-twisted. Supplied as a coreless spool with internal payout, suitable for EZ100 and EZ300.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Parachute for internal conduit ø 30-60 mm
Parachute for internal conduit ø 30-60 mm
Parachute for internal conduit ø 30-60 mm as a spare part; designed to facilitate blowing in the pulling cord in conduits with an inner diameter of 30–60 mm when shuttle deployment is not possible.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Element Set A
Element Set A
Element Set A spare part for the EZ50, designed for insertion of the special cord into pipes with an 18–20 mm inner diameter; includes two ½" reduction joints (19/12 mm) and an internal 9.5 mm nozzle.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
1 to 20 (from a total of 112)

Why SEMPERDEAL?

✔ Wide selection of tested professional tools
✔ Fast shipping & free delivery on orders over €500
✔ Expert advice, demonstrations & training
✔ Quality trusted by trade professionals

Applications

Our cable pulling technology and pulling aids are ideal for electrical contractors, telecom operators, network providers and all professionals in **cable installation and conduit works**. Whether in ducts, pipes or trenches – with SEMPERDEAL you operate efficiently, safely, and precisely.