Cable & Pipe Locators – locate utilities with confidence

Our cable & pipe locators help you trace buried utilities quickly and safely. Systems combine a transmitter and receiver for active locating and offer field-ready features like depth indication and directional guidance.

  • Active locating: Apply signals via direct connection or induction
  • Versatile tasks: Trace metallic lines and locate sondes in non-metallic ducts
  • Fault finding: Optional A-frame to pinpoint sheath/insulation faults

Transmitter Clamp 130 mm for Genny4 Sender
Transmitter Clamp 130 mm for Genny4 Sender
This clamp is used to inductively couple a Genny signal onto a specific conductor. It is particularly useful when direct signal coupling is not possible, or on live cables that cannot be de-energized.
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Bendisonde 512Hz
Bendisonde 512Hz
  • Frequency 512Hz
  • Locating depth up to 6m (for iron pipes)
  • Sonde diameter 23mm
  • Sonde length 478mm
  • Thread connection M10 (male)
  • Power supply: 1x AA
  • Sonde type: With 2 spring joints
Delivery incl. batteries
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Rodding Snake Ø11.0 mm / 200 lm Blue
Rodding Snake Ø11.0 mm / 200 lm Blue
Mobile version with 1 start bulb incl. shackle

Reel diameter 1000 mm, hot-dip galvanized
Push cable diameter 11.0 mm
Start/end sleeve thread M12
Tensile strength 500 kg
Bending radius 770 mm
Push cable length 200 m
Weight 50 kg
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Replacement Duct Rod Ø11 mm / 200 running meters, blue
Replacement Duct Rod Ø11 mm / 200 running meters, blue
M12 threaded start and end ferrules; tensile strength 500 kg; bending radius 770 mm; push rod length 200 m; weight 21.2 kg.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Standard Channel Sonde 512Hz
Standard Channel Sonde 512Hz
  • Frequency 512Hz
  • Locating depth up to 5m (for iron pipelines)
  • Sonde diameter 39mm
  • Sonde length 168mm
  • Thread connection M10 (male)
  • Power supply: 1x AA
  • Sonde type: Rigid
Delivery incl. batteries
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Transmitter Clamp 215 mm for Genny4 Sender
Transmitter Clamp 215 mm for Genny4 Sender
This clamp is used to inductively couple a Genny signal onto a specific conductor. It is particularly useful when direct signal coupling is not possible, or on live cables that cannot be de-energized.
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Omni Marker II for Euro Electricity
Omni Marker II for Euro Electricity
Color: red / blue
Frequency: 134.0kHz
Application: Euro electricity
Laying depth: up to 1.5m

The OMNI-Marker II is a spherical marker from Tempo® used to electrically mark utility points. The sphere is placed above the point to be marked. The integrated transmitting coil inside the marker automatically aligns itself.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Locating Rod Ø11.0 mm / 200 lm Black
Locating Rod Ø11.0 mm / 200 lm Black
Mobile version with integrated copper conductor and 1 start bulb incl. shackle

Reel diameter 1000 mm, hot-dip galvanized
Push cable diameter 11.0 mm
Start/end sleeve thread M12
Tensile strength 500 kg
Bending radius 770 mm
Push cable length 200 m
Weight 50 kg
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Replacement Duct Rod Ø 11 mm / 200 running meters, black
Replacement Duct Rod Ø 11 mm / 200 running meters, black
With copper tracer; M12 threaded start and end ferrules; tensile strength 500 kg; bending radius 770 mm; push rod length 120 m; weight 21.2 kg.
 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
100mm Signal Clamp for 201G Transmitter
100mm Signal Clamp for 201G Transmitter
Used to apply a signal to a specific cable or line. Particularly useful where a direct connection is not possible or for live cables that cannot be switched off. Can be used with the extension rod.
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Standard Sonde (Channel Sonde) 8kHz
Standard Sonde (Channel Sonde) 8kHz
  • Frequency 8kHz
  • Locating depth up to 5m
  • Sonde diameter 39mm
  • Sonde length 168mm
  • Connection thread M10 (male)
  • Power supply: 1x AA
  • Sonde type: Rigid
Delivery incl. batteries
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Rodding Snake Ø15.0 mm / 250 Water Blue
Rodding Snake Ø15.0 mm / 250 Water Blue
Mobile version with 1 start bulb incl. shackle

Reel diameter 1500 mm, hot-dip galvanized
Push cable diameter 15.0 mm
Start/end sleeve thread M12
Tensile strength 650 kg
Bending radius 1150 mm
Push cable length 250 m
Weight 113 kg
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Omni Marker II for Water
Omni Marker II for Water
Color: blue
Frequency: 145.7kHz
Application: water
Laying depth: up to 1.5m

The OMNI-Marker II is a spherical marker from Tempo® used to electrically mark utility points. The sphere is installed above the utility point to be marked. The integrated transmitting coil inside the marker automatically aligns itself.

 
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Locating Rod Ø15.0 mm / 250 lm Black
Locating Rod Ø15.0 mm / 250 lm Black
Mobile version with integrated copper conductor and 1 start bulb incl. shackle

Reel diameter 1500 mm, hot-dip galvanized
Push cable diameter 15.0 mm
Start/end sleeve thread M12
Tensile strength 650 kg
Bending radius 1150 mm
Push cable length 250 m
Weight 113 kg
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
100 mm Transmitter Clamp for Transmitters T1, Tx-1, Tx-5 und Tx-10
100 mm Transmitter Clamp for Transmitters T1, Tx-1, Tx-5 und Tx-10
This clamp is used to apply a transmitter signal to a single cable or pipe. It is particularly useful on live cables that cannot be de-energized, or when a direct signal connection is not possible. It can also be used with the extension rod.
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Rodding Snake Ø15.0 mm / 350 lm Water Blue
Rodding Snake Ø15.0 mm / 350 lm Water Blue
Mobile version with 1 start bulb incl. shackle

Reel diameter 1500 mm, hot-dip galvanized
Push cable diameter 15.0 mm
Start/end sleeve thread M12
Tensile strength 650 kg
Bending radius 1150 mm
Push cable length 350 m
Weight 141 kg
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
MegaProbe PL42-05 (M12)
MegaProbe PL42-05 (M12)
  • Frequency 512Hz
  • Locating depth up to 13m (for iron pipes)
  • Probe diameter 42mm
  • Probe length 234mm
  • Connection thread M12 (Female)
  • Power supply: 8x LR6
  • Probe type: Rigid
Delivery incl. batteries
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Sewer Sonde (Ultra Sonde) 33kHz
Sewer Sonde (Ultra Sonde) 33kHz
  • Frequency: 33kHz
  • Locating depth up to 8 m
  • Sonde diameter: 64mm
  • Sonde length: 168mm
  • Thread connection: M10 (male)
  • Power supply: 1x AA
  • Sonde type: Rigid
Delivery includes batteries
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
130 mm Transmitter Clamp for Transmitters T1, Tx-1, Tx-5 und Tx-10
130 mm Transmitter Clamp for Transmitters T1, Tx-1, Tx-5 und Tx-10
This clamp is used to apply a transmitter signal to a single cable or pipe. It is particularly useful on live cables that cannot be de-energized, or when a direct signal connection is not possible. It can also be used with the extension rod.
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
161 to 180 (from a total of 237)

How to choose the right locator

  • Use case: Route tracing, service drops or pinpoint fault locating
  • Frequencies & screens: Select operating frequencies and views (e.g. guidance/peak) for your environment
  • Accessories: Induction clamp for contactless coupling, sondes for non-metallic ducts, A-frame for faults
  • Documentation: Consider depth readout and logging if required

Safety & practice

Always locate before you dig, mark the path and verify depth. Watch for interference and adapt your locating strategy when signals are ambiguous.