Skip to content

pulseEKKO Antennas, Transmitters and Receivers (12.5–200 MHz)

For great depths, pulseEKKO keeps antenna and electronics separate: the low-frequency antenna pair (12.5 to 200 MHz) is only the antenna, while the transmitter and receiver are the electronics for it. They mount on the centre of the transmitting and receiving antenna and fit every frequency in this range.

This is how you put together option B: a low-frequency antenna pair of the required frequency, a transmitter and a receiver – the Receiver 1600 or the Ultra Receiver 3200, which lowers the noise by up to a factor of 100 and thus reaches deeper. For borehole surveys there is the borehole antenna pair (50, 100 or 200 MHz), which works with the same transmitter and the Receiver 1600. In every case the pulseEKKO control unit is added.

pulseEKKO low-frequency antennas 12.5, 25, 50, 100 and 200 MHz compared by size, each with mounted electronics
pulseEKKO Low-Frequency Antenna Pair (12.5–200 MHz) – without Transmitter and Receiver
The low-frequency antenna pair is the antenna part of the pulseEKKO for great depths: one transmitting and one receiving antenna of the same frequency, without transmitter and receiver electronics.

- Frequency to choose: 12.5, 25, 50, 100 or 200 MHz
- Unshielded resistive dipoles, not transducers
- Transmitter and receiver fit every one of these frequencies
- Also needed: transmitter, Receiver 1600 or Ultra Receiver 3200, control unit
- 50, 100 and 200 MHz also on the SmartCart or SmartTow
Product No.: PE-ANT-NF
Price on requestRequest a quote ›
pulseEKKO Low-Frequency Antenna Pair (12.5–200 MHz) – without Transmitter and Receiver: Show product
pulseEKKO transmitter: yellow transmitter module with connectors on top
pulseEKKO Transmitter for all Low-Frequency and Borehole Antennas
The transmitter is the transmitting electronics of the pulseEKKO for low-frequency and borehole antennas; the antennas are not included.

- Fits every frequency from 12.5 to 200 MHz
- ETSI-compliant version for the EU (EN 302 066)
- Transmit voltage matched to the frequency in the “Auto” setting
- Two 12 V batteries, fibre optic connection
- Also needed: antenna pair, receiver, control unit
Product No.: PE-TX
Price on requestRequest a quote ›
pulseEKKO Transmitter for all Low-Frequency and Borehole Antennas: Show product
pulseEKKO Receiver 1600: yellow receiver module with connectors on top
pulseEKKO Receiver 1600 (16-bit) for all Low-Frequency and Borehole Antennas
The Receiver 1600 is the receiving electronics of the pulseEKKO for low-frequency and borehole antennas; the antennas are not included.

- Fits every frequency from 12.5 to 200 MHz
- 16 bit, stacking up to 2048 times
- Digitisation directly at the receiving antenna
- Two 12 V batteries, fibre optic connection
- Also for SPIDAR multi-channel systems
Product No.: PE-RX-1600
Price on requestRequest a quote ›
pulseEKKO Receiver 1600 (16-bit) for all Low-Frequency and Borehole Antennas: Show product
pulseEKKO Ultra Receiver 3200: wide yellow receiver module with connectors on top
pulseEKKO Ultra Receiver 3200 (32-bit) for all Low-Frequency Antennas
The Ultra Receiver 3200 is the receiving electronics of the pulseEKKO for even greater depths with low-frequency antennas; the antennas are not included.

- Fits every frequency from 12.5 to 200 MHz
- 32 bit, stacking up to 65,536 times
- Noise lowered by up to a factor of 100
- Replaces the Receiver 1600 on the receiving antenna
- Two 12 V batteries, fibre optic connection
Product No.: PE-RX-3200
Price on requestRequest a quote ›
pulseEKKO Ultra Receiver 3200 (32-bit) for all Low-Frequency Antennas: Show product
Borehole survey with pulseEKKO: transmitting antenna in the borehole, receiving antenna at the surface, ray paths shown schematically
pulseEKKO Borehole Antenna Pair (50, 100 or 200 MHz) – without Transmitter and Receiver
The borehole antenna pair is the antenna part of the pulseEKKO for borehole surveys, without transmitter and receiver electronics.

- Frequency to choose: 50, 100 or 200 MHz
- For boreholes from 33 mm diameter
- Borehole separation 2 to 20 m, 30 m cable
- Survey types ZOP, MOG and VRP
- Also needed: transmitter, Receiver 1600, control unit
Product No.: PE-BOREHOLE
Price on requestRequest a quote ›
pulseEKKO Borehole Antenna Pair (50, 100 or 200 MHz) – without Transmitter and Receiver: Show product
1 to 5 (from a total of 5)

Transducers with built-in transmitter and receiver for 250 to 1000 MHz are listed under pulseEKKO transducers. Batteries for the control unit, the charger and GNSS parts are listed under Accessories for pulseEKKO.

Frequently asked questions

General1
Who are the products intended for?
Our range is aimed at specialist companies and organisations in the utilities and civil-engineering sector – including municipal utilities, water suppliers, energy utilities (EVU), construction companies, municipalities, telecommunications companies, engineering offices and technical service providers.
Was this helpful?Thanks for your feedback!
Orders & Shipping12
Can I place an order by phone? Can I order by phone? Ordering by phone
Yes, you can also order by phone. Call us at +43 (0) 2252 53169 (Mon–Thu 08:00–17:00, Fri 08:00–12:00) and our team will be happy to take your order.
Was this helpful?Thanks for your feedback!
What delivery time can I expect?
The delivery time shown for each item applies; our shipping and payment terms also list the usual times per country. Delivery times are not binding unless we have expressly confirmed a date as binding in writing (e-mail is sufficient). Express shipping is available on request.
Was this helpful?Thanks for your feedback!
Can I order as a private individual?
SEMPERDEAL is intended exclusively for commercial (business) customers. Unfortunately, private individuals cannot register or open an account.
Was this helpful?Thanks for your feedback!
What should I do if I received the wrong item?
If you ever receive the wrong item, please let us know immediately – by email to kontakt@semperdeal.com, including your order number and a photo of the delivery. We'll then arrange an exchange right away.
Was this helpful?Thanks for your feedback!
Can I cancel an order?
Yes. As long as your order has not yet been shipped, you can cancel it. Please contact us as soon as possible by email at kontakt@semperdeal.com or by phone at +43 (0) 2252 53169.
Was this helpful?Thanks for your feedback!
How do I change my delivery address?
You can enter a different delivery address during checkout. For changes after ordering, contact us before dispatch: kontakt@semperdeal.com
Was this helpful?Thanks for your feedback!
Which countries do you ship to?
We deliver to all EU countries and to Switzerland. Delivery to other countries is available on request – simply contact us at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
How do I see whether an item is available?
Availability is shown directly on the respective product page. If an item is marked "on request", we'll be happy to tell you the current delivery time at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Are bulk or large orders possible?
Bulk orders are always welcome. For larger volumes we're happy to offer a quantity discount – simply request your quote at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Do you offer express shipping?
Yes, express shipping is available on request. We'll gladly let you know the options and costs – just call us at +43 (0) 2252 53169 or email kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
How can I check the status of my order?
You can check the current status of your order at any time in your customer account once you are logged in. If you have any questions, please contact us – ideally with your order number – at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
How do I place an order?
It's easy: select the product you want in our online shop, add it to your cart and complete the checkout. Just follow the steps for shipping and payment – you'll then receive an order confirmation by email. Of course, we're also happy to take your order personally: write to us at kontakt@semperdeal.com or give us a call.
Was this helpful?Thanks for your feedback!
Payment & Invoicing4
Can I buy on account?
Purchase on account is available to registered B2B customers following a successful credit check. To have it activated, simply contact us at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Do you offer leasing or financing?
For selected devices we offer leasing and financing options. We'll be happy to discuss the details and suitable terms with you: kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
What happens if an invoice is overdue?
If an invoice is overdue, you'll first receive a friendly payment reminder. For questions about open items, contact us at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Which payment methods do you offer?
The available payment methods are advance payment (bank transfer), instant bank transfer (Sofort) and purchase on account. Purchase on account is reserved for registered B2B customers following a successful credit check. Leasing/financing is available on request: kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Prices & Discounts4
How can I see the prices?
As a B2B shop, we display our prices in the customer area after you log in. All prices are net, plus VAT. For selected products, prices are also visible without logging in – i.e. for guests. For special conditions, please contact us at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Do you offer used or demo devices?
From time to time we offer tested used and demo devices. As availability varies, it's best to ask us directly about current offers: kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Are there quantity discounts or graduated prices?
Yes. Depending on the product and order quantity, quantity discounts and graduated prices are possible. We'll be happy to prepare your individual quote: kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Do you offer project pricing or framework agreements?
For large projects we offer individual project pricing and framework agreements. Just tell us about your project – we'll prepare a tailored offer for you: kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Account & Registration1
How long does account activation take?
Your B2B account is activated after a brief review, usually within one business day. If it ever takes longer, feel free to contact us at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Returns & Warranty2
Can I return or exchange products?
No. SEMPERDEAL sells to businesses only; there is no right of withdrawal or return, not even for unused goods in their original packaging. If goods are defective or we have delivered the wrong item, please notify us without delay after delivery at kontakt@semperdeal.com; we will then tell you how to proceed. Please never send goods back unannounced.
Was this helpful?Thanks for your feedback!
What should I do if the goods arrive damaged?
Please document any transport damage immediately with photos and report it within 24 hours to kontakt@semperdeal.com. That way we can process the damage quickly for you.
Was this helpful?Thanks for your feedback!
Technical Consulting1
Which device is right for my application?
We're happy to help. Just describe your application and we'll recommend the right device for you. You can reach us by email at kontakt@semperdeal.com, via chat, or by phone at +43 (0) 2252 53169.
Was this helpful?Thanks for your feedback!

No matching answer found

Try different wording – or ask us your question below.

Question not found?

Ask us directly — we answer personally.

Thank you! We will get back to you soon.
Sending failed. Please try again later.