Skip to content

Accessories for LMX

Accessories and spare parts for the LMX systems: display units, batteries, charger and connection cables, wheels, cart parts and skid plates, a small parts kit, transport cases and bags, odometers as well as GNSS packages, cables and mounts for positioning. Which version a part fits, such as LMX100, LMX150 FINDAR or LMX200, is stated in the product name or the selection.

The device updates for the LMX displays are listed under “GPR device updates”.

Sensors & Software ATA flight case for the LMX150 FINDAR GPR with display bag
The transport case protects the LMX150 FINDAR GPR system from Sensors & Software together with its accessories during transport.

- Fits: LMX150 FINDAR
- Rugged shipping case in ATA design (LMX Series ATA Shipping Case)
- Includes display bag 100-60-0059 for display unit and GPR accessories
- Size 81 x 74 x 51 cm
- For LMX100 and LMX200 there is a separate case 100-60-0058
Product No.: 100-60-0061
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: 5-15 working days 5-15 working days
(abroad may vary)
Sensors & Software large wheel set, 31.75 x 5.7 cm, for LMX100, LMX150 FINDAR and LMX200 GPR systems
The large wheel set from Sensors & Software fits all LMX ground penetrating radar systems.

- Dimensions 31.75 x 5.7 cm
- For LMX100, LMX150 FINDAR and LMX200
- Supplied as a set
Product No.: 100-54-0134
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: 5-15 working days 5-15 working days
(abroad may vary)
Sensors & Software GNSS mount for the Geode GNSS receiver on the LMX150 FINDAR and LMX200 GPR cart
The GNSS mount from Sensors & Software holds the Geode GNSS receiver on the chassis of the LMX ground penetrating radar systems.

- For LMX150 FINDAR and LMX200
- Included in the LMX-SG GNSS package, available separately here
- The Geode fits all Sensors & Software GNSS mounts
- For NOGGIN systems there are separate mounts
Product No.: 100-53-0100
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: 5-15 working days 5-15 working days
(abroad may vary)
Sensors & Software display cable between sensor and display unit of the LMX GPR
The display cable from Sensors & Software connects the sensor of the LMX ground penetrating radar systems to the display unit.

- Original designation: Display Cable
- Fits: LMX100, LMX200 and LMX150 FINDAR
- Same number for all three LMX systems
Product No.: 100-52-0108
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: 5-15 working days 5-15 working days
(abroad may vary)
Sensors & Software battery cable for LMX100, LMX150 FINDAR and LMX200 GPR systems
The battery cable is the Battery Cable of the LMX100, LMX150 FINDAR and LMX200 GPR systems from Sensors & Software.

- Fits: LMX100, LMX150 FINDAR, LMX200
- Same part number for all three models
- Matching battery: 100-55-0023 (Battery with Case)
- Spare part from the Sensors & Software range
Product No.: 126-77-2010
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: 5-15 working days 5-15 working days
(abroad may vary)
Sensors & Software skid plate for the sensor of the LMX150 FINDAR GPR
The skid plate is the spare part underneath the sensor of the LMX150 FINDAR GPR from Sensors & Software.

- Fits: LMX150 FINDAR
- Original designation: Skid Plate
- Counterpart for LMX100 and LMX200: separate version 126-77-1450
Product No.: 126-81-1150
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: 5-15 working days 5-15 working days
(abroad may vary)
Sensors & Software GPR odometer with connection cable for LMX100, LMX150 FINDAR and LMX200
The GPR odometer with cable from Sensors & Software is intended as a spare part for distance measurement on the GPR systems.

- Odometer with connection cable
- Fits LMX100, LMX150 FINDAR and LMX200
Product No.: 126-77-1950
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: 5-15 working days 5-15 working days
(abroad may vary)
GPR-SG GNSS package from Sensors & Software with Juniper Geode receiver on the GNSS mount of a GPR system
The GPR-SG GNSS package from Sensors & Software integrates a pre-configured Juniper Geode GNSS receiver into the GPR survey and records positions on the DVL at 10 Hz.

- Pre-configured Juniper Geode (100-22-0123, with 10 Hz upgrade)
- Without RTK: L1, GPS/GLONASS/BeiDou/GALILEO, 30 cm RMS, free SBAS correction
- With RTK upgrade (100-22-0124): L1/L2/L5, GALHAS, 1 cm RMS with RTK correction service
- Powered from the GPR battery, noise-suppressed cable in platform-specific length
- Versions for LMX, Noggin SmartCart, SmartChariot/SmartSled and SmartTow/SmartHandle
Platform and RTK:
Product No.:
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: 5-15 working days 5-15 working days
(abroad may vary)
GNSS cable from Sensors & Software for the GPR-SG Geode receiver on the GPR system
The GNSS cable connects the GPR-SG Geode receiver to the Sensors & Software GPR system and powers it directly from the GPR battery.

- Noise-suppressing power cable: removes interference with the GPR signal
- Powers the GNSS receiver directly from the GPR battery
- Three lengths: 1.1 m, 2.75 m and 13 m
- 1.1 m for Noggin 250/500/1000 SmartCart, 2.75 m for Noggin 100/pulseEKKO SmartCart and SmartTow/SmartHandle, 13 m for SmartChariot/SmartSled
- Fits: GPR-SG Geode on NOGGIN, pulseEKKO, LMX and SPIDAR
Cable Length:
Product No.:
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: 5-15 working days 5-15 working days
(abroad may vary)
GPS receiver with yellow antenna dome and connection cable as accessory for RD1100 and RD1500 ground penetrating radar
The GPS rover enables position-accurate data acquisition with the LMX200 (LMX150) Profi GPR. The rover is mounted onto the ground-penetrating radar's chassis using a supplied mounting kit. An interface cable provides the electrical connection between the central unit (display) of the LMX and the rover.

- GPS rover with mounting kit
- Interface cable
- User manual
Product No.: 100-54-0150
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: 5-15 working days 5-15 working days
(abroad may vary)
Black Radiodetection wheeled transport case with aluminium edges for the RD1100 ground penetrating radar
Robust, wheeled transport case for the safe transport of LMX ground-penetrating radar systems from RADIODETECTION and Sensors & Software including accessories.

- For the LMX100, LMX150 and LMX200 models
- Bag for the display and small parts included
Product No.: 100-60-0058
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: On demand On demand
(abroad may vary)
Yellow deluxe carrying case 100-60-0066 for the LMX100/200 display, shown next to the display (not included)
Rugged case for transporting and storing the display of the LMX100/200 ground-penetrating radar system.

- Pelican case with an interior lining of high-density foam that protects against shock and impact damage
- Compatible with LMX100, LMX150 and LMX200
- Weight 5 kg
Product No.: 100-60-0066
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: On demand On demand
(abroad may vary)
Black padded display carry bag with handle and clip buckle for the RD1100 ground penetrating radar
Robust carrying bag for the display of the LMX100/200 ground-penetrating radar system and small accessories.

- Soft-sided version (soft case)
- Compatible with LMX100, LMX150 and LMX200
- Also included in the LMX Series ATA Shipping Case
Product No.: 100-60-0059
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: 5-15 working days 5-15 working days
(abroad may vary)
Fibreglass Cart Base frame for the Sensors & Software LMX100 and LMX200 GPR carts
The Cart Base is the load-bearing frame of the Sensors & Software LMX cart: the chassis that carries the battery, the GPR sensor and the cart handle.

- Chassis frame (Cart Base) for the LMX100 and LMX200 GPR carts
- Lightweight fibreglass frame with no metal parts to interfere with the GPR signal
- Carries battery, GPR sensor and cart handle
- Battery strapped in place, handle attached via handle pins
- Part no. 126-81-1600, identical for both systems
- Individually orderable spare part
Cart Base chassis for the Sensors & Software LMX150 FINDAR GPR cart
The chassis frame of the smaller LMX150 FINDAR cart by Sensors & Software.

- Chassis frame (Cart Base) for the LMX150 FINDAR GPR cart
- Dedicated part number 126-88-0380, not interchangeable with LMX100/LMX200
- Orderable as a spare part
- Cart handle and wheel remain identical to LMX100/LMX200
Cart Handle with display mount for the Sensors & Software LMX GPR carts
The Cart Handle is the push handle of the Sensors & Software LMX cart.

- Push handle (Cart Handle) for the LMX GPR carts
- Fits LMX100, LMX200 and LMX150 FINDAR – one part number for all three
- Attaches to the Cart Base using the handle pins
- Carries the Display Unit Tray facing the operator
Cart Wheel for the Sensors & Software LMX GPR carts, right rear wheel with direct odometer drive
Single wheel for the Sensors & Software LMX cart.

- Single cart wheel for the LMX GPR carts
- Fits LMX100, LMX200 and LMX150 FINDAR – identical part number for all three carts
- Mounted right rear, the wheel directly drives the odometer
- Maintenance: tighten the wheel nut by 1/8 to 1/16 turn if play develops
Product No.: 122-10-2377
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: 5-15 working days 5-15 working days
(abroad may vary)
1 to 20 (from a total of 26)

Some parts also fit the other GPR series and are therefore also listed on their accessories pages, for example the charger, display case and GNSS packages.

Frequently asked questions

General1
Who are the products intended for?
Our range is aimed at specialist companies and organisations in the utilities and civil-engineering sector – including municipal utilities, water suppliers, energy utilities (EVU), construction companies, municipalities, telecommunications companies, engineering offices and technical service providers.
Was this helpful?Thanks for your feedback!
Orders & Shipping12
Can I place an order by phone? Can I order by phone? Ordering by phone
Yes, you can also order by phone. Call us at +43 (0) 2252 53169 (Mon–Thu 08:00–17:00, Fri 08:00–12:00) and our team will be happy to take your order.
Was this helpful?Thanks for your feedback!
What delivery time can I expect?
The delivery time shown for each item applies; our shipping and payment terms also list the usual times per country. Delivery times are not binding unless we have expressly confirmed a date as binding in writing (e-mail is sufficient). Express shipping is available on request.
Was this helpful?Thanks for your feedback!
Can I order as a private individual?
SEMPERDEAL is intended exclusively for commercial (business) customers. Unfortunately, private individuals cannot register or open an account.
Was this helpful?Thanks for your feedback!
What should I do if I received the wrong item?
If you ever receive the wrong item, please let us know immediately – by email to kontakt@semperdeal.com, including your order number and a photo of the delivery. We'll then arrange an exchange right away.
Was this helpful?Thanks for your feedback!
Can I cancel an order?
Yes. As long as your order has not yet been shipped, you can cancel it. Please contact us as soon as possible by email at kontakt@semperdeal.com or by phone at +43 (0) 2252 53169.
Was this helpful?Thanks for your feedback!
How do I change my delivery address?
You can enter a different delivery address during checkout. For changes after ordering, contact us before dispatch: kontakt@semperdeal.com
Was this helpful?Thanks for your feedback!
Which countries do you ship to?
We deliver to all EU countries and to Switzerland. Delivery to other countries is available on request – simply contact us at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
How do I see whether an item is available?
Availability is shown directly on the respective product page. If an item is marked "on request", we'll be happy to tell you the current delivery time at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Are bulk or large orders possible?
Bulk orders are always welcome. For larger volumes we're happy to offer a quantity discount – simply request your quote at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Do you offer express shipping?
Yes, express shipping is available on request. We'll gladly let you know the options and costs – just call us at +43 (0) 2252 53169 or email kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
How can I check the status of my order?
You can check the current status of your order at any time in your customer account once you are logged in. If you have any questions, please contact us – ideally with your order number – at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
How do I place an order?
It's easy: select the product you want in our online shop, add it to your cart and complete the checkout. Just follow the steps for shipping and payment – you'll then receive an order confirmation by email. Of course, we're also happy to take your order personally: write to us at kontakt@semperdeal.com or give us a call.
Was this helpful?Thanks for your feedback!
Payment & Invoicing4
Can I buy on account?
Purchase on account is available to registered B2B customers following a successful credit check. To have it activated, simply contact us at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Do you offer leasing or financing?
For selected devices we offer leasing and financing options. We'll be happy to discuss the details and suitable terms with you: kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
What happens if an invoice is overdue?
If an invoice is overdue, you'll first receive a friendly payment reminder. For questions about open items, contact us at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Which payment methods do you offer?
The available payment methods are advance payment (bank transfer), instant bank transfer (Sofort) and purchase on account. Purchase on account is reserved for registered B2B customers following a successful credit check. Leasing/financing is available on request: kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Prices & Discounts4
How can I see the prices?
As a B2B shop, we display our prices in the customer area after you log in. All prices are net, plus VAT. For selected products, prices are also visible without logging in – i.e. for guests. For special conditions, please contact us at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Do you offer used or demo devices?
From time to time we offer tested used and demo devices. As availability varies, it's best to ask us directly about current offers: kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Are there quantity discounts or graduated prices?
Yes. Depending on the product and order quantity, quantity discounts and graduated prices are possible. We'll be happy to prepare your individual quote: kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Do you offer project pricing or framework agreements?
For large projects we offer individual project pricing and framework agreements. Just tell us about your project – we'll prepare a tailored offer for you: kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Account & Registration1
How long does account activation take?
Your B2B account is activated after a brief review, usually within one business day. If it ever takes longer, feel free to contact us at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Returns & Warranty2
Can I return or exchange products?
No. SEMPERDEAL sells to businesses only; there is no right of withdrawal or return, not even for unused goods in their original packaging. If goods are defective or we have delivered the wrong item, please notify us without delay after delivery at kontakt@semperdeal.com; we will then tell you how to proceed. Please never send goods back unannounced.
Was this helpful?Thanks for your feedback!
What should I do if the goods arrive damaged?
Please document any transport damage immediately with photos and report it within 24 hours to kontakt@semperdeal.com. That way we can process the damage quickly for you.
Was this helpful?Thanks for your feedback!
Technical Consulting1
Which device is right for my application?
We're happy to help. Just describe your application and we'll recommend the right device for you. You can reach us by email at kontakt@semperdeal.com, via chat, or by phone at +43 (0) 2252 53169.
Was this helpful?Thanks for your feedback!

No matching answer found

Try different wording – or ask us your question below.

Question not found?

Ask us directly — we answer personally.

Thank you! We will get back to you soon.
Sending failed. Please try again later.