Skip to content

Accessories for duct rods

Everything to make your pipe snake faster and safer in everyday use: starter bulbs with eyelets, couplings, eyelets and other attachments for GRP pull rods. Suitable for standard rod diameters and threads (e.g. M5/M6) – simply select and fit.

Suitable accessories for GRP pull rods

In this category, you’ll find attachments and connectors that allow you to adapt your pipe snake flexibly to different applications. Whether you’re inserting it into a pipe or expanding your existing setup – the components are straightforward to fit and can be combined with one another.

Your benefits at a glance

  • Ready to go in no time: guide sleeves and eyelets for smooth insertion into the pipe
  • Flexible combinations: couplings and connectors for modular set-ups
  • Durable in use: Sturdy metal parts for everyday use on construction sites

How to find the right accessories

When selecting accessories, ensure you choose the correct rod diameter and the appropriate thread for your GRP pull rods (e.g. M5/M6). This ensures that starter sleeves, eyelets and couplings can be fitted straight away and fit together reliably.

Two-component epoxy adhesive for fibreglass rods ø 6–15 mm, 24 ml
NEW
Two-component epoxy resin adhesive in a 24 ml pack for gluing the start/end sleeves and connecting sleeves onto fibreglass rods ø 6 to 15 mm; part of the repair sets for these rods.

- Adhesive type: two-component epoxy resin
- Contents: 24 ml
- Use: gluing start/end sleeves and connecting sleeves onto fibreglass rods ø 6 to 15 mm
- Weight: 0.053 kg
- Country of origin: Italy
Start/end sleeve M12 for fibreglass rod ø 7.5 mm
NEW
The M12 start/end sleeve is bonded onto the end of a ø 7.5 mm fibreglass rod and carries the thread for screwing on a pulling head, guide head or cable pulling grip.

- For fibreglass rod: ø 7.5 mm
- Thread: M12
- Outer diameter of the sleeve: 11 mm
- Range: VOLTAFIX ø 7.5 mm
- Weight: 0.036 kg
- Country of origin: Italy
Start/end sleeve M5 for fibreglass rod ø 4.5 mm
NEW
The M5 start/end sleeve is bonded onto the end of a ø 4.5 mm fibreglass rod and carries the thread for screwing on a pulling head, guide head or cable pulling grip.

- For fibreglass rod: ø 4.5 mm
- Thread: M5
- Outer diameter of the sleeve: 6 mm
- Range: VOLTAFOX ø 4.5 mm
- Weight: 0.002 kg
- Country of origin: Italy
Start/end sleeve M12 for fibreglass rod ø 13 mm
NEW
The M12 start/end sleeve is bonded onto the end of a ø 13 mm fibreglass rod and carries the thread for screwing on a pulling head, guide head or cable pulling grip.

- For fibreglass rod: ø 13 mm
- Thread: M12
- Outer diameter of the sleeve: 20 mm
- Range: VOLTAKONG ø 13 mm
- Weight: 0.128 kg
- Country of origin: Italy
Start/end sleeve M12 for fibreglass rod ø 11 mm
NEW
The M12 start/end sleeve is bonded onto the end of a ø 11 mm fibreglass rod and carries the thread for screwing on a pulling head, guide head or cable pulling grip.

- For fibreglass rod: ø 11 mm
- Thread: M12
- Outer diameter of the sleeve: 14 mm
- Range: VOLTAPOWER ø 11 mm
- Weight: 0.053 kg
- Country of origin: Italy
Start/end sleeve M12 for fibreglass rod ø 15 mm
NEW
The M12 start/end sleeve is bonded onto the end of a ø 15 mm fibreglass rod and carries the thread for screwing on a pulling head, guide head or cable pulling grip.

- For fibreglass rod: ø 15 mm
- Thread: M12
- Outer diameter of the sleeve: 20 mm
- Range: VOLTAKING ø 15 mm
- Weight: 0.128 kg
- Country of origin: Italy
Start/end sleeve M12 for fibreglass rod ø 9 mm
NEW
The M12 start/end sleeve is bonded onto the end of a ø 9 mm fibreglass rod and carries the thread for screwing on a pulling head, guide head or cable pulling grip.

- For fibreglass rod: ø 9 mm
- Thread: M12
- Outer diameter of the sleeve: 12 mm
- Range: VOLTASTRONG ø 9 mm
- Weight: 0.035 kg
- Country of origin: Italy
Start/end sleeve M5 for fibreglass rod ø 3 mm
NEW
The M5 start/end sleeve is bonded onto the end of a ø 3 mm fibreglass rod and carries the thread for screwing on a pulling head, guide head or cable pulling grip.

- For fibreglass rod: ø 3 mm
- Thread: M5
- Outer diameter of the sleeve: 6 mm
- Range: GIRAVOLTA ø 3 mm
- Weight: 0.003 kg
- Country of origin: Italy
Start/end sleeve M6 for fibreglass rod ø 6 mm
NEW
The M6 start/end sleeve is bonded onto the end of a ø 6 mm fibreglass rod and carries the thread for screwing on a pulling head, guide head or cable pulling grip.

- For fibreglass rod: ø 6 mm
- Thread: M6
- Outer diameter of the sleeve: 8 mm
- Range: VOLTASIX ø 6 mm
- Weight: 0.012 kg
- Country of origin: Italy
Pair of catch devices with M12 thread for coupling two fibreglass rods
NEW
Galvanised steel catch device with M12 thread, supplied as a pair: one part goes on the end of each fibreglass rod with M12 thread, so that two rods can be linked inside the duct.

- Material: galvanised steel
- Thread: M12
- For fibreglass rods with M12 thread
- Duct diameter 80 to 200 mm
- Weight: 195 to 880 g
- Country of origin: Italy
- Supplied as a pair
- Accessory for rods ø 7.5 mm (duct 80–100 mm) and ø 9 to 15 mm (duct 100–200 mm)
Duct diameter · weight:
Spring guide head M5 with eye for VORTICVOLTA and VOLTATWIST® fish tapes
NEW
With an eye and M5 connection, this spring guide head leads the VORTICVOLTA or VOLTATWIST® fish tape through bends and past conduit joints; the tip does not swivel.

- Thread: M5
- Suitable for: VORTICVOLTA ø 4.0 to 5.2 mm (head ø 7 mm), VOLTATWIST® ø 6.0 mm (head ø 8 mm)
- Head diameter: 7 to 10 mm
- Country of origin: Italy
- With an eye
- Guides the fish tape through bends and past couplings
Head diameter · version:
Spring guide head M6, head ø 10 mm
NEW
With an M6 thread and a 10 mm head diameter, this spring guide head forms a flexible tip for pulling rods and fish tapes.

- Thread: M6
- Head diameter: 10 mm
- Suitable for: VOLTASIX ø 6 mm
- Weight: 16 g
- Country of origin: Italy
- Flexible tip
- For pulling rods and fish tapes
Spring guide head ø 14 mm with M12 thread
NEW
Spring guide head ø 14 mm with M12 thread, the flexible tip for cable rods with an M12 fitting.

- Thread: M12
- Diameter: 14 mm
- Weight: 0.072 kg
- Country of origin: Italy
Roller rod guide for steel reels with M5 thread and two aluminium rollers
NEW
Roller rod guide for the steel reels GVAV55, GVAVR55, GVAV60 and GVAV60R: two aluminium rollers on a holder with an M5 threaded bolt guide the fibreglass rod ø 6, 7.5 and 9 mm as it is paid out and wound back.

- Design: roller rod guide, two aluminium rollers
- Thread: M5
- For fibreglass rod: ø 6, 7.5 and 9 mm
- Suitable for: steel reels GVAV55, GVAVR55, GVAV60 and GVAV60R
- Weight: 0.085 kg
- Country of origin: Italy
1 to 20 (from a total of 41)

Suitable accessories for duct rods and fibreglass rods

For your push and pull systems to work reliably, the right accessories are essential. Whether threaded attachments, guides, swivel couplings or repair kits – the following notes will help you select the right component for your application.

How to choose the right accessories

  • Thread & rod: M5 usually for 4–5 mm, M6 for 6 mm, M12 for 7.5–15 mm (please check the manufacturer’s specifications).
  • Application: Flexible guide for tight bends; roller guide when cables are already in the pipe.
  • Connection & rotation: A swivel coupling prevents twisting between the rod and the pulling line.
  • Repair: In the event of breakage, use a repair kit with a splice sleeve & two-component epoxy – once cured, the connection is ready for use again.

Notes for safe operation

Ensure the attachments are firmly seated and check the threads and guides regularly for wear. Also take into account the tensile forces occurring throughout the system to ensure a long service life and trouble-free operation.

Select the right accessories for your application now – if you have any questions about your selection, we will be glad to advise you.

Many of these parts also fit traceable fibreglass rods and are therefore also listed under “Accessories for traceable duct rods”.

Frequently asked questions

General1
Who are the products intended for?
Our range is aimed at specialist companies and organisations in the utilities and civil-engineering sector – including municipal utilities, water suppliers, energy utilities (EVU), construction companies, municipalities, telecommunications companies, engineering offices and technical service providers.
Was this helpful?Thanks for your feedback!
Orders & Shipping12
Can I place an order by phone? Can I order by phone? Ordering by phone
Yes, you can also order by phone. Call us at +43 (0) 2252 53169 (Mon–Thu 08:00–17:00, Fri 08:00–12:00) and our team will be happy to take your order.
Was this helpful?Thanks for your feedback!
What delivery time can I expect?
The delivery time shown for each item applies; our shipping and payment terms also list the usual times per country. Delivery times are not binding unless we have expressly confirmed a date as binding in writing (e-mail is sufficient). Express shipping is available on request.
Was this helpful?Thanks for your feedback!
Can I order as a private individual?
SEMPERDEAL is intended exclusively for commercial (business) customers. Unfortunately, private individuals cannot register or open an account.
Was this helpful?Thanks for your feedback!
What should I do if I received the wrong item?
If you ever receive the wrong item, please let us know immediately – by email to kontakt@semperdeal.com, including your order number and a photo of the delivery. We'll then arrange an exchange right away.
Was this helpful?Thanks for your feedback!
Can I cancel an order?
Yes. As long as your order has not yet been shipped, you can cancel it. Please contact us as soon as possible by email at kontakt@semperdeal.com or by phone at +43 (0) 2252 53169.
Was this helpful?Thanks for your feedback!
How do I change my delivery address?
You can enter a different delivery address during checkout. For changes after ordering, contact us before dispatch: kontakt@semperdeal.com
Was this helpful?Thanks for your feedback!
Which countries do you ship to?
We deliver to all EU countries and to Switzerland. Delivery to other countries is available on request – simply contact us at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
How do I see whether an item is available?
Availability is shown directly on the respective product page. If an item is marked "on request", we'll be happy to tell you the current delivery time at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Are bulk or large orders possible?
Bulk orders are always welcome. For larger volumes we're happy to offer a quantity discount – simply request your quote at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Do you offer express shipping?
Yes, express shipping is available on request. We'll gladly let you know the options and costs – just call us at +43 (0) 2252 53169 or email kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
How can I check the status of my order?
You can check the current status of your order at any time in your customer account once you are logged in. If you have any questions, please contact us – ideally with your order number – at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
How do I place an order?
It's easy: select the product you want in our online shop, add it to your cart and complete the checkout. Just follow the steps for shipping and payment – you'll then receive an order confirmation by email. Of course, we're also happy to take your order personally: write to us at kontakt@semperdeal.com or give us a call.
Was this helpful?Thanks for your feedback!
Payment & Invoicing4
Can I buy on account?
Purchase on account is available to registered B2B customers following a successful credit check. To have it activated, simply contact us at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Do you offer leasing or financing?
For selected devices we offer leasing and financing options. We'll be happy to discuss the details and suitable terms with you: kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
What happens if an invoice is overdue?
If an invoice is overdue, you'll first receive a friendly payment reminder. For questions about open items, contact us at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Which payment methods do you offer?
The available payment methods are advance payment (bank transfer), instant bank transfer (Sofort) and purchase on account. Purchase on account is reserved for registered B2B customers following a successful credit check. Leasing/financing is available on request: kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Prices & Discounts4
How can I see the prices?
As a B2B shop, we display our prices in the customer area after you log in. All prices are net, plus VAT. For selected products, prices are also visible without logging in – i.e. for guests. For special conditions, please contact us at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Do you offer used or demo devices?
From time to time we offer tested used and demo devices. As availability varies, it's best to ask us directly about current offers: kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Are there quantity discounts or graduated prices?
Yes. Depending on the product and order quantity, quantity discounts and graduated prices are possible. We'll be happy to prepare your individual quote: kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Do you offer project pricing or framework agreements?
For large projects we offer individual project pricing and framework agreements. Just tell us about your project – we'll prepare a tailored offer for you: kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Account & Registration1
How long does account activation take?
Your B2B account is activated after a brief review, usually within one business day. If it ever takes longer, feel free to contact us at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Returns & Warranty2
Can I return or exchange products?
No. SEMPERDEAL sells to businesses only; there is no right of withdrawal or return, not even for unused goods in their original packaging. If goods are defective or we have delivered the wrong item, please notify us without delay after delivery at kontakt@semperdeal.com; we will then tell you how to proceed. Please never send goods back unannounced.
Was this helpful?Thanks for your feedback!
What should I do if the goods arrive damaged?
Please document any transport damage immediately with photos and report it within 24 hours to kontakt@semperdeal.com. That way we can process the damage quickly for you.
Was this helpful?Thanks for your feedback!
Technical Consulting1
Which device is right for my application?
We're happy to help. Just describe your application and we'll recommend the right device for you. You can reach us by email at kontakt@semperdeal.com, via chat, or by phone at +43 (0) 2252 53169.
Was this helpful?Thanks for your feedback!

No matching answer found

Try different wording – or ask us your question below.

Question not found?

Ask us directly — we answer personally.

Thank you! We will get back to you soon.
Sending failed. Please try again later.