Skip to content

Accessories for traceable duct rods

Here you will find precisely matched accessories for the professional use of locating rods: for improved pushing performance, secure pull connections and reliable signal transmission in the field.

Accessories for locating rods at a glance

To ensure your locating rod performs reliably in use, the right accessories are essential. Whether it's securely connecting individual components, signal transmission or protection when feeding through bends and inlets – in this category you'll find exactly the right additions to make your day-to-day work easier.

What you can expect in this category

  • Matching end pieces, pull heads & threaded adaptors for stable connections
  • Sonde adaptors for 512/640 Hz & 33 kHz for reliable signal transmission
  • Guide & protective cones for protected feeding through bends and inlets

This allows individual components to be combined in a targeted manner – for a secure pull connection, improved pushing performance and reliable location even under demanding conditions.

Two-component epoxy adhesive for fibreglass rods ø 6–15 mm, 24 ml
NEW
Two-component epoxy resin adhesive in a 24 ml pack for gluing the start/end sleeves and connecting sleeves onto fibreglass rods ø 6 to 15 mm; part of the repair sets for these rods.

- Adhesive type: two-component epoxy resin
- Contents: 24 ml
- Use: gluing start/end sleeves and connecting sleeves onto fibreglass rods ø 6 to 15 mm
- Weight: 0.053 kg
- Country of origin: Italy
Start/end sleeve M12 for fibreglass rod ø 7.5 mm
NEW
The M12 start/end sleeve is bonded onto the end of a ø 7.5 mm fibreglass rod and carries the thread for screwing on a pulling head, guide head or cable pulling grip.

- For fibreglass rod: ø 7.5 mm
- Thread: M12
- Outer diameter of the sleeve: 11 mm
- Range: VOLTAFIX ø 7.5 mm
- Weight: 0.036 kg
- Country of origin: Italy
Start/end sleeve M5 for fibreglass rod ø 4.5 mm
NEW
The M5 start/end sleeve is bonded onto the end of a ø 4.5 mm fibreglass rod and carries the thread for screwing on a pulling head, guide head or cable pulling grip.

- For fibreglass rod: ø 4.5 mm
- Thread: M5
- Outer diameter of the sleeve: 6 mm
- Range: VOLTAFOX ø 4.5 mm
- Weight: 0.002 kg
- Country of origin: Italy
Start/end sleeve M12 for fibreglass rod ø 13 mm
NEW
The M12 start/end sleeve is bonded onto the end of a ø 13 mm fibreglass rod and carries the thread for screwing on a pulling head, guide head or cable pulling grip.

- For fibreglass rod: ø 13 mm
- Thread: M12
- Outer diameter of the sleeve: 20 mm
- Range: VOLTAKONG ø 13 mm
- Weight: 0.128 kg
- Country of origin: Italy
Start/end sleeve M12 for fibreglass rod ø 11 mm
NEW
The M12 start/end sleeve is bonded onto the end of a ø 11 mm fibreglass rod and carries the thread for screwing on a pulling head, guide head or cable pulling grip.

- For fibreglass rod: ø 11 mm
- Thread: M12
- Outer diameter of the sleeve: 14 mm
- Range: VOLTAPOWER ø 11 mm
- Weight: 0.053 kg
- Country of origin: Italy
Start/end sleeve M12 for fibreglass rod ø 15 mm
NEW
The M12 start/end sleeve is bonded onto the end of a ø 15 mm fibreglass rod and carries the thread for screwing on a pulling head, guide head or cable pulling grip.

- For fibreglass rod: ø 15 mm
- Thread: M12
- Outer diameter of the sleeve: 20 mm
- Range: VOLTAKING ø 15 mm
- Weight: 0.128 kg
- Country of origin: Italy
Start/end sleeve M12 for fibreglass rod ø 9 mm
NEW
The M12 start/end sleeve is bonded onto the end of a ø 9 mm fibreglass rod and carries the thread for screwing on a pulling head, guide head or cable pulling grip.

- For fibreglass rod: ø 9 mm
- Thread: M12
- Outer diameter of the sleeve: 12 mm
- Range: VOLTASTRONG ø 9 mm
- Weight: 0.035 kg
- Country of origin: Italy
Start/end sleeve M5 for fibreglass rod ø 3 mm
NEW
The M5 start/end sleeve is bonded onto the end of a ø 3 mm fibreglass rod and carries the thread for screwing on a pulling head, guide head or cable pulling grip.

- For fibreglass rod: ø 3 mm
- Thread: M5
- Outer diameter of the sleeve: 6 mm
- Range: GIRAVOLTA ø 3 mm
- Weight: 0.003 kg
- Country of origin: Italy
Start/end sleeve M6 for fibreglass rod ø 6 mm
NEW
The M6 start/end sleeve is bonded onto the end of a ø 6 mm fibreglass rod and carries the thread for screwing on a pulling head, guide head or cable pulling grip.

- For fibreglass rod: ø 6 mm
- Thread: M6
- Outer diameter of the sleeve: 8 mm
- Range: VOLTASIX ø 6 mm
- Weight: 0.012 kg
- Country of origin: Italy
Pair of catch devices with M12 thread for coupling two fibreglass rods
NEW
Galvanised steel catch device with M12 thread, supplied as a pair: one part goes on the end of each fibreglass rod with M12 thread, so that two rods can be linked inside the duct.

- Material: galvanised steel
- Thread: M12
- For fibreglass rods with M12 thread
- Duct diameter 80 to 200 mm
- Weight: 195 to 880 g
- Country of origin: Italy
- Supplied as a pair
- Accessory for rods ø 7.5 mm (duct 80–100 mm) and ø 9 to 15 mm (duct 100–200 mm)
Duct diameter · weight:
Spring guide head M6, head ø 10 mm
NEW
With an M6 thread and a 10 mm head diameter, this spring guide head forms a flexible tip for pulling rods and fish tapes.

- Thread: M6
- Head diameter: 10 mm
- Suitable for: VOLTASIX ø 6 mm
- Weight: 16 g
- Country of origin: Italy
- Flexible tip
- For pulling rods and fish tapes
Spring guide head ø 14 mm with M12 thread
NEW
Spring guide head ø 14 mm with M12 thread, the flexible tip for cable rods with an M12 fitting.

- Thread: M12
- Diameter: 14 mm
- Weight: 0.072 kg
- Country of origin: Italy
Roller rod guide for steel reels with M5 thread and two aluminium rollers
NEW
Roller rod guide for the steel reels GVAV55, GVAVR55, GVAV60 and GVAV60R: two aluminium rollers on a holder with an M5 threaded bolt guide the fibreglass rod ø 6, 7.5 and 9 mm as it is paid out and wound back.

- Design: roller rod guide, two aluminium rollers
- Thread: M5
- For fibreglass rod: ø 6, 7.5 and 9 mm
- Suitable for: steel reels GVAV55, GVAVR55, GVAV60 and GVAV60R
- Weight: 0.085 kg
- Country of origin: Italy
Roller rod guide for steel reels with M8 thread and two aluminium rollers
NEW
Roller rod guide for the steel reels GVAV79R, GVAV100R, GVAV100LR and GVAV120R: two aluminium rollers on a holder with an M8 threaded bolt guide the fibreglass rod ø 9, 11 and 13 mm as it is paid out and wound back.

- Design: roller rod guide, two aluminium rollers
- Thread: M8
- For fibreglass rod: ø 9, 11 and 13 mm
- Suitable for: steel reels GVAV79R, GVAV100R, GVAV100LR and GVAV120R
- Weight: 0.282 kg
- Country of origin: Italy
Chrome-plated retaining cap for ø 20 mm axle
NEW
Chrome-plated retaining cap for a ø 20 mm axle that secures the rim laterally on the axle and is supplied complete.

- Finish: chrome-plated
- For axle: ø 20 mm
- Purpose: lateral fastening of the rim
- Weight: 0.011 kg
- Country of origin: Italy
1 to 20 (from a total of 38)

What do I need accessories for locating rods for?

The right accessories increase the range, handling and locating quality of your locating rod. Robust pull heads and threaded adaptors ensure secure connections, whilst sonde adaptors deliver the locating signal precisely where it is needed. This allows you to get more out of your existing equipment and work more efficiently in the field.

Typical components at a glance

  • Pull heads & end pieces: secure connection for pulling and locating work
  • Threaded adaptors: for adapting different thread sizes
  • Sonde adaptors: for fitting sondes (e.g. 512/640 Hz, 33 kHz)
  • Guide and protective cones: reduce friction and protect against edges
  • Repair & connector sets: restoration in the event of sheath damage or fibre breakage
  • Swivel joints & swivels: prevent torsion during pulling
  • Measuring counters & brakes: controlled feeding in and out as well as length control
  • Connection & earthing cables: secure signal and earth routing

Selection guide: finding the right accessories

  • Compatibility: check thread size, diameter and manufacturer specifications
  • Application profile: take into account bend radii, pipe material and depth
  • Signal routing: use suitable accessories for the selected frequency

Tip: Keep a repair kit and spare tips to hand – this minimises downtime on site.

Many of these parts also fit duct rods without a conductor and are therefore also listed under “Accessories for duct rods”.

Frequently asked questions

General1
Who are the products intended for?
Our range is aimed at specialist companies and organisations in the utilities and civil-engineering sector – including municipal utilities, water suppliers, energy utilities (EVU), construction companies, municipalities, telecommunications companies, engineering offices and technical service providers.
Was this helpful?Thanks for your feedback!
Orders & Shipping12
Can I place an order by phone? Can I order by phone? Ordering by phone
Yes, you can also order by phone. Call us at +43 (0) 2252 53169 (Mon–Thu 08:00–17:00, Fri 08:00–12:00) and our team will be happy to take your order.
Was this helpful?Thanks for your feedback!
What delivery time can I expect?
The delivery time shown for each item applies; our shipping and payment terms also list the usual times per country. Delivery times are not binding unless we have expressly confirmed a date as binding in writing (e-mail is sufficient). Express shipping is available on request.
Was this helpful?Thanks for your feedback!
Can I order as a private individual?
SEMPERDEAL is intended exclusively for commercial (business) customers. Unfortunately, private individuals cannot register or open an account.
Was this helpful?Thanks for your feedback!
What should I do if I received the wrong item?
If you ever receive the wrong item, please let us know immediately – by email to kontakt@semperdeal.com, including your order number and a photo of the delivery. We'll then arrange an exchange right away.
Was this helpful?Thanks for your feedback!
Can I cancel an order?
Yes. As long as your order has not yet been shipped, you can cancel it. Please contact us as soon as possible by email at kontakt@semperdeal.com or by phone at +43 (0) 2252 53169.
Was this helpful?Thanks for your feedback!
How do I change my delivery address?
You can enter a different delivery address during checkout. For changes after ordering, contact us before dispatch: kontakt@semperdeal.com
Was this helpful?Thanks for your feedback!
Which countries do you ship to?
We deliver to all EU countries and to Switzerland. Delivery to other countries is available on request – simply contact us at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
How do I see whether an item is available?
Availability is shown directly on the respective product page. If an item is marked "on request", we'll be happy to tell you the current delivery time at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Are bulk or large orders possible?
Bulk orders are always welcome. For larger volumes we're happy to offer a quantity discount – simply request your quote at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Do you offer express shipping?
Yes, express shipping is available on request. We'll gladly let you know the options and costs – just call us at +43 (0) 2252 53169 or email kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
How can I check the status of my order?
You can check the current status of your order at any time in your customer account once you are logged in. If you have any questions, please contact us – ideally with your order number – at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
How do I place an order?
It's easy: select the product you want in our online shop, add it to your cart and complete the checkout. Just follow the steps for shipping and payment – you'll then receive an order confirmation by email. Of course, we're also happy to take your order personally: write to us at kontakt@semperdeal.com or give us a call.
Was this helpful?Thanks for your feedback!
Payment & Invoicing4
Can I buy on account?
Purchase on account is available to registered B2B customers following a successful credit check. To have it activated, simply contact us at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Do you offer leasing or financing?
For selected devices we offer leasing and financing options. We'll be happy to discuss the details and suitable terms with you: kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
What happens if an invoice is overdue?
If an invoice is overdue, you'll first receive a friendly payment reminder. For questions about open items, contact us at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Which payment methods do you offer?
The available payment methods are advance payment (bank transfer), instant bank transfer (Sofort) and purchase on account. Purchase on account is reserved for registered B2B customers following a successful credit check. Leasing/financing is available on request: kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Prices & Discounts4
How can I see the prices?
As a B2B shop, we display our prices in the customer area after you log in. All prices are net, plus VAT. For selected products, prices are also visible without logging in – i.e. for guests. For special conditions, please contact us at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Do you offer used or demo devices?
From time to time we offer tested used and demo devices. As availability varies, it's best to ask us directly about current offers: kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Are there quantity discounts or graduated prices?
Yes. Depending on the product and order quantity, quantity discounts and graduated prices are possible. We'll be happy to prepare your individual quote: kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Do you offer project pricing or framework agreements?
For large projects we offer individual project pricing and framework agreements. Just tell us about your project – we'll prepare a tailored offer for you: kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Account & Registration1
How long does account activation take?
Your B2B account is activated after a brief review, usually within one business day. If it ever takes longer, feel free to contact us at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Returns & Warranty2
Can I return or exchange products?
No. SEMPERDEAL sells to businesses only; there is no right of withdrawal or return, not even for unused goods in their original packaging. If goods are defective or we have delivered the wrong item, please notify us without delay after delivery at kontakt@semperdeal.com; we will then tell you how to proceed. Please never send goods back unannounced.
Was this helpful?Thanks for your feedback!
What should I do if the goods arrive damaged?
Please document any transport damage immediately with photos and report it within 24 hours to kontakt@semperdeal.com. That way we can process the damage quickly for you.
Was this helpful?Thanks for your feedback!
Technical Consulting1
Which device is right for my application?
We're happy to help. Just describe your application and we'll recommend the right device for you. You can reach us by email at kontakt@semperdeal.com, via chat, or by phone at +43 (0) 2252 53169.
Was this helpful?Thanks for your feedback!

No matching answer found

Try different wording – or ask us your question below.

Question not found?

Ask us directly — we answer personally.

Thank you! We will get back to you soon.
Sending failed. Please try again later.