Skip to content

Rent sondes

In the “Rent sondes” category you will find various locating sondes for pipe and water pipe locating, including standard sondes, micro sondes, super small sondes, mini sondes, Supersondes and Bendisondes in different diameters and frequencies.

S6 microsonde with black tip, flexible metal spring section and stainless steel body
Rental
S6 probe / microprobe for locating non-metallic pipes, particularly narrow pipes and fine water pipe systems, inserted into the pipe to be located using a locating snake or a fibreglass rod.

- Diameter 6 mm
- Frequency 33 kHz, signal range approx. 1.5 to 2 m
- Recommended receivers: C.A.T4+, SuperC.A.T4+ or RD7xxxx set to the 33 kHz probe reception mode
- Operating time approx. 10 hours at room temperature, 8 hours at 0 °C
- Minimum bend radius 130 mm
- Supplied with probe battery cell
Product No.: S6SOND-33K-MIET
from 19,00 EUR
plus 20% tax excl. Shipping costs
Shippingtime: 3-4 working days 3-4 working days
(abroad may vary)
S13 sonde with black plastic cap, stainless steel body and threaded connector for pipe locating
Rental
S13 probe / super-mini probe for locating non-metallic pipes such as plastic water pipes, inserted into the pipe to be located using a locating rod or a fibreglass rod.

- Diameter 13 mm
- Frequency 33 kHz, located at the surface with the receiver set to 33 kHz
- Recommended receivers: SD200STD, C.A.T4+, gC.A.T4+, SuperC.A.T4+, RD7xxx
- Supplied with button cell battery
Product No.: S13SOND-33K-MIET
from 18,00 EUR
plus 20% tax excl. Shipping costs
Shippingtime: 3-4 working days 3-4 working days
(abroad may vary)
Stock: 1 Stk.
Flexible Bendi sonde 512 Hz with two spring joints and stainless steel connection sleeve
Rental
Bendisonde for locating non-metallic pipes and, to a limited extent, cast iron pipes, inserted into the pipe to be located using a locating snake or a fibreglass rod.

- Diameter 22 mm
- Low-frequency 512 Hz signal, so cast iron pipes (particularly grey cast iron) can also be located to a limited extent
- 3-section sonde for improved flexibility around pipe and duct corners
- Connection: M10 male end cap
- Recommended receivers: RD7100DL or RD7200
- Supplied with AA battery
Product No.: BENSOND-512-MIET
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: 3-4 working days 3-4 working days
(abroad may vary)
Stock: 1 Stk.
1 to 6 (from a total of 6)
In the “Rent sondes” category you will find various locating sondes for pipe locating and water pipe locating. The range includes the Standard sonde / sewer sonde (DM 39 mm) 33 kHz, the S6 sonde / micro sonde (DM 6 mm) 33 kHz, the S13 sonde / super small sonde (DM 13 mm) 33 kHz for water pipes, the S18 sonde / mini sonde (DM 18 mm) 33 kHz, the Supersonde (DM 64 mm) 33 kHz for very deep pipe routes and the Bendisonde (DM 22 mm) 512 Hz for locating non-metallic pipelines and, to a limited extent, cast-iron pipelines.

The Standard sonde / sewer sonde (DM 39 mm) 33 kHz, the S6 sonde / micro sonde (DM 6 mm) 33 kHz, the S13 sonde / super small sonde (DM 13 mm) 33 kHz and the S18 sonde / mini sonde (DM 18 mm) 33 kHz are used for locating non-metallic pipelines. The Supersonde (DM 64 mm) 33 kHz is also used for locating non-metallic pipelines and is particularly suitable for very deep pipe routes. The Bendisonde (DM 22 mm) 512 Hz is used for locating non-metallic pipelines and, to a limited extent, cast-iron pipelines; thanks to the low-frequency signal, cast-iron pipes (especially grey cast iron) can also be located to a limited extent.

All sondes are inserted into the pipe to be located by means of a push rod or fibreglass rod and are designed for use with suitable sonde locators.
 

Frequently asked questions

General1
Who are the products intended for?
Our range is aimed at specialist companies and organisations in the utilities and civil-engineering sector – including municipal utilities, water suppliers, energy utilities (EVU), construction companies, municipalities, telecommunications companies, engineering offices and technical service providers.
Was this helpful?Thanks for your feedback!
Equipment Rental10
Are there conditions for long-term rental?
Yes. From a rental period of one month, we offer discounted conditions for long-term rental. You'll receive your individual quote at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
What is the minimum rental period?
The minimum rental period is one day. You can rent a device for a single day; longer periods are possible at any time.
Was this helpful?Thanks for your feedback!
Can I extend a rental device?
Yes, an extension is possible by arrangement, provided the device has not already been reserved by someone else. Please ask in good time so we can ensure availability: kontakt@semperdeal.com or +43 (0) 2252 53169.
Was this helpful?Thanks for your feedback!
Can I pick up a rental device?
You can pick up your rental device directly from us in Traiskirchen, Wiener Straße 99, or have it shipped to you. Shipping costs are borne by the renter. To arrange a pickup time, contact us at kontakt@semperdeal.com or +43 (0) 2252 53169.
Was this helpful?Thanks for your feedback!
What happens if a rental device is damaged?
Please report any damage to a rental device immediately at kontakt@semperdeal.com. The renter is liable for damage that goes beyond normal wear and tear.
Was this helpful?Thanks for your feedback!
Which devices can I rent?
We rent out cable locators, leak detection equipment, sewer inspection systems, metal detectors and cable fault locators. We'll gladly let you know the daily rental rate (net) and availability: kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
How long can I rent a device for?
The minimum rental period is one day. We also offer weekly and monthly rates. The exact duration is arranged individually with you: kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Can I reserve a rental device?
Yes. Please ask about current availability at kontakt@semperdeal.com or +43 (0) 2252 53169. As rental devices are in high demand, we recommend reserving early.
Was this helpful?Thanks for your feedback!
How do I return a rental device?
Please return the rental device complete and cleaned on the agreed date. The renter is liable for any damage or loss. If you have any questions about the return, contact us at kontakt@semperdeal.com
Was this helpful?Thanks for your feedback!
Is a deposit required for rental devices?
A deposit is required for rental devices, depending on the value of the device. It is refunded in full upon proper return.
Was this helpful?Thanks for your feedback!

No matching answer found

Try different wording – or ask us your question below.

Question not found?

Ask us directly — we answer personally.

Thank you! We will get back to you soon.
Sending failed. Please try again later.