Skip to content

Special-purpose pulling grips

Special-purpose pulling grips cover jobs a standard grip cannot handle: joining grips connect two cable ends, safety grips with two eyes secure the pull on high-pressure lines, and protective and special designs offer PVC-protected eyes, laterally open mesh, swivelling connectors or low-twist braiding. There are also grips in stainless steel or synthetic fibre and grips for laying underwater cables. Choose by task, cable diameter and eye design. The pulling and safety grips hang on the pulling rope by an eye or thimble like the industrial grips; the joining grips couple two cable ends, and the protective grip protects compressed-air hoses against wear. Together they cover cables up to 240 mm and breaking loads up to 110,000 daN.

Reinforced steel safety pulling grip without thimbles for high-pressure lines
NEW
Safety pulling grip, steel, without thimbles, for high-pressure lines, reinforced
Reinforced steel safety grip for high-pressure lines from 25 to 105 mm, attached by two eyes without thimbles.

- Material: steel
- Wire dia. 2.0 mm
- Line diameter: 25 to 105 mm
- Overall length 1,050 to 1,500 mm
- Working length 800 to 1,200 mm
- 6 to 10 strands
- Two eyes without thimbles
- Breaking load: 7,000 to 15,000 daN
- Weight: 1.25 to 2.85 kg
- Country of origin: Italy
Line diameter · breaking load, working length:
Product No.:
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: On demand On demand
(abroad may vary)
Safety pulling grip, steel, without thimbles, for high-pressure lines, reinforced: Show product
Nylon cable joining grip, non-conductive, for cables 15 to 100 mm
NEW
Cable joining grip, nylon, non-conductive, for cables 15–100 mm
Non-conductive nylon joining grip for connecting two cable ends, with size-dependent working lengths for cables from 15 to 100 mm.

- Nylon, non-conductive
- Cable diameter: 15 to 100 mm, depending on variant
- Overall length 1,400 to 1,800 mm
- Working length 700 + 700 to 900 + 900 mm
- 5 to 8 strands
- Wire dia. 2.0 mm
- Breaking load 1,200 to 3,000 daN
- Colour: orange
- Made in Italy
Cable diameter · breaking load, overall length:
Product No.:
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: On demand On demand
(abroad may vary)
Cable joining grip, nylon, non-conductive, for cables 15–100 mm: Show product
Low-twist braided steel cable joining grip
NEW
Cable joining grip, steel, low-twist braided
The cable joining grip is braided from anti-twist steel rope with a square section, so that it transmits no twist to the cables during the pull.

- Material: steel
- Cable diameter: 15 to 100 mm
- Overall length 1,700 to 3,300 mm
- Working length 700 + 700 to 1,400 + 1,400 mm
- Breaking load 3,000 to 16,000 daN
- Weight 1.40 to 5.80 kg
- Country of origin: Italy
- Non-rotating, low-twist braid
Cable diameter · breaking load, overall length, working length and weight:
Product No.:
Price on requestRequest a quote ›
Cable joining grip, steel, low-twist braided: Show product
Steel underwater cable joining grip with central sleeve
NEW
Underwater cable joining grip, steel, with central sleeve
Using a central connecting sleeve, this steel grip couples two underwater cable ends in line for diameters from 65 to 220 mm.

- Material: steel
- Cable diameter: 65 to 220 mm
- Overall length 4,700 to 9,100 mm
- Working length 2,300 + 2,300 to 4,500 + 4,500 mm
- Breaking load 25,000 to 110,000 daN
- Weight 8 to 70 kg
- Country of origin: Italy
- Central connecting sleeve
Cable diameter · breaking load and working length:
Product No.:
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: On demand On demand
(abroad may vary)
Underwater cable joining grip, steel, with central sleeve: Show product
Reinforced steel underwater cable joining grip with central sleeve
NEW
Underwater cable joining grip, steel, with central sleeve, reinforced
A central sleeve links the reinforced steel mesh sections of this cable joining grip for joining underwater cable ends from 65 to 150 mm in diameter.

- Material: steel
- Cable diameter: 65 to 150 mm
- Overall length 5,300 to 8,100 mm
- Working length 2,600 + 2,600 to 4,000 + 4,000 mm
- Breaking load 40,000 to 90,000 daN
- Reinforced version
- Weight 14 to 51 kg
- Country of origin: Italy
- Central connecting sleeve
Cable diameter · breaking load and working length:
Product No.:
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: On demand On demand
(abroad may vary)
Underwater cable joining grip, steel, with central sleeve, reinforced: Show product
Steel cable joining grip for conductors with square cross-section
NEW
Cable joining grip, steel, for conductors of square section
Joining grip of steel wire that couples two conductors of square section from 30 × 30 to 100 × 100 mm in line, for instance when replacing a cable.

- Conductor cross-section 30 × 30 to 100 × 100 mm
- Overall length 1,500 to 2,750 mm
- Working length L₁ 700 + 700 to 1,300 + 1,300 mm
- 8 strands
- Wire ø 1.25 or 1.50 mm
- Breaking load 3,000 to 13,000 daN
- Weight 1.44 to 5.40 kg
Conductor cross-section · breaking load, overall and working length, weight:
Product No.:
Price on requestRequest a quote ›
Cable joining grip, steel, for conductors of square section: Show product
Steel cable pulling or support grip, two eyes with PVC cover
NEW
Cable pulling or support grip, steel, two eyes with PVC cover
A pair of PVC-protected eyes connects this steel pulling and support grip to the pulling attachment for cables from 10 to 80 mm in diameter.

- Material: steel
- Cable diameter: 10 to 80 mm
- Working length: 500 to 900 mm
- Overall length: 750 to 1,200 mm
- Pulling connection: two eyes
- Eye cover: PVC
- Breaking load: 2,000 to 6,000 daN
- Country of origin: Italy
- Application: pulling and installing cables
Cable diameter · breaking load, working and overall length:
Product No.:
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: On demand On demand
(abroad may vary)
Cable pulling or support grip, steel, two eyes with PVC cover: Show product
Steel cable pulling or support grip, single eye with PVC cover
NEW
Cable pulling or support grip, steel, single eye with PVC cover
With a single PVC-protected eye, this steel mesh grip serves for pulling or suspending cables from 10 to 80 mm in diameter.

- Material: steel
- Cable diameter: 10 to 80 mm
- Working length: 500 to 900 mm
- Overall length: 750 to 1,200 mm
- Pulling connection: one eye
- Eye cover: PVC
- Breaking load: 2,000 to 6,000 daN
- Country of origin: Italy
- Application: pulling or suspending cables
Cable diameter · breaking load, working and overall length:
Product No.:
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: On demand On demand
(abroad may vary)
Cable pulling or support grip, steel, single eye with PVC cover: Show product
Cable pulling grip made of Dyneema® rope, two eyes
NEW
Cable pulling grip of Dyneema® rope, two eyes
Slid over the cable end, this Dyneema® grip pulls cables from 50 to 240 mm in diameter through two attachment eyes.

- Material: Dyneema®
- Cable diameter: 50 to 240 mm
- Overall length: 1,850 to 5,200 mm
- Pulling connection: two eyes
- Breaking load: 15,000 to 85,000 daN
- Country of origin: Italy
- Slides over the cable end
- Application: cable pulling
Cable diameter · breaking load, overall length, working length, weight:
Product No.:
Price on requestRequest a quote ›
Cable pulling grip of Dyneema® rope, two eyes: Show product
Cable pulling grip made of Dyneema® rope, laterally open
NEW
Cable pulling grip of Dyneema® rope, laterally open
Laterally open Dyneema® mesh allows this pulling grip to be fitted around cables from 50 to 240 mm and connected to the pulling rope through two eyes.

- Material: Dyneema®
- Cable diameter: 50 to 240 mm
- Working length: 1,600 to 4,500 mm
- Overall length: 1,850 to 5,200 mm
- Laterally open design
- Pulling connection: two eyes
- Connection to the pulling rope through the eyes
- Breaking load: 15,000 to 85,000 daN
- Country of origin: Italy
Cable diameter · breaking load, working length, overall length, weight:
Product No.:
Price on requestRequest a quote ›
Cable pulling grip of Dyneema® rope, laterally open: Show product
Stainless steel AISI-316 underwater cable pulling grip, two eyes, closed or laterally open
NEW
Underwater cable pulling grip, stainless steel AISI-316, two eyes, closed or laterally open
When underwater cables are pulled in, the stainless steel mesh clamps the cable under tension and transfers the pulling force to its sheath; the pull is applied through two eyes without thimbles, i.e. without a metal insert in the eye.

- Stainless steel AISI-316
- Application: laying underwater cables
- Wire ø 3.0 or 4.0 mm
- Two eyes without thimble reinforcement
- Overall length 2,100 to 4,500 mm
- Version: closed (IN) or open at the side with two lacing wires (INAP)
- Working length 1,800 to 4,000 mm
- Breaking load 13,000 to 60,000 daN
- 6 to 12 strands
- Construction 3 x 133 up to 120–140 mm, 4 x 133 from 140–170 mm
Cable diameter · version, breaking load and working length:
Product No.:
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: On demand On demand
(abroad may vary)
Underwater cable pulling grip, stainless steel AISI-316, two eyes, closed or laterally open: Show product
Kevlar® cable pulling grip, single eye without thimble
NEW
Cable pulling grip made of Kevlar®, with one eye, without thimble
Kevlar® cable pulling grip with one eye without thimble for cables from 15 to 90 mm: the mesh is slipped over the cable end and tightens around the sheath along the working length of 1,300 mm.

- Made of Kevlar®
- For cable diameters 15 to 90 mm
- Wire ø 2.5 mm
- Overall length 1,500 mm
- Working length 1,300 mm
- Breaking load 1,700 to 5,200 daN depending on size
Cable diameter · breaking load, number of strands, construction, eye, weight:
Product No.:
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: On demand On demand
(abroad may vary)
Cable pulling grip made of Kevlar®, with one eye, without thimble: Show product
Kevlar® cable pulling grip with two eyes
NEW
Cable pulling grip made of Kevlar® with two eyes
The Kevlar® braid encloses the cable end over 1,300 mm of working length and ends in two eyes that take the pull.

- Braid made of Kevlar®
- For cable diameters 15 to 90 mm
- Overall length 1,500 mm
- Working length 1,300 mm
- Breaking load 1,700 to 5,200 daN depending on version
- Wire ø 2.5 mm
Cable diameter · breaking load, strands, construction, eye size:
Product No.:
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: On demand On demand
(abroad may vary)
Cable pulling grip made of Kevlar® with two eyes: Show product
Nylon cable pulling grip, non-conductive, laterally open
NEW
Cable pulling grip, nylon, non-conductive, laterally open
Laterally open, non-conductive nylon pulling grip with one eye for cables from 15 to 100 mm.

- Material: nylon
- Cable diameter: 15 to 100 mm
- Working length: 700 to 900 mm
- Overall length: 850 to 1,050 mm
- Pulling connection: one eye
- Breaking load: 1,200 to 3,000 daN
- Non-conductive
- Laterally open design
- Country of origin: Italy
Cable diameter · breaking load, working and overall length:
Product No.:
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: On demand On demand
(abroad may vary)
Cable pulling grip, nylon, non-conductive, laterally open: Show product
Nylon cable pulling grip, non-conductive, single eye
NEW
Cable pulling grip, nylon, non-conductive, single eye
A single eye transfers the pull to cables from 15 to 100 mm in diameter in this reinforced, non-conductive nylon grip.

- Material: nylon
- Cable diameter: 15 to 100 mm
- Pulling connection: one eye
- Breaking load: 1,200 to 3,000 daN
- Reinforced design
- Country of origin: Italy
- Non-conductive
Cable diameter · breaking load, working length and overall length:
Product No.:
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: On demand On demand
(abroad may vary)
Cable pulling grip, nylon, non-conductive, single eye: Show product
Nylon cable pulling grip, non-conductive, two eyes
NEW
Cable pulling grip, nylon, non-conductive, two eyes
The twin-eye end of this reinforced nylon pulling grip provides the pulling attachment for cables from 15 to 100 mm with non-conductive mesh.

- Material: nylon
- Cable diameter: 15 to 100 mm
- Pulling connection: two eyes
- Breaking load: 1,200 to 3,000 daN
- Reinforced design
- Country of origin: Italy
- Non-conductive
Cable diameter · breaking load, working length and overall length:
Product No.:
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: On demand On demand
(abroad may vary)
Cable pulling grip, nylon, non-conductive, two eyes: Show product
Steel cable pulling grip, single eye, PVC-coated
NEW
Cable pulling grip, steel, single eye, PVC-coated
Braided from PVC-coated steel strands, this cable pulling grip holds the cable end and is connected to the pulling rope by a single plastic-coated eye.

- Material: steel strands with PVC coating
- Cable diameter: 15 to 120 mm
- Overall length 1,000 to 1,750 mm
- Working length 800 to 1,500 mm
- Wire dia. 3.0 mm
- 5 to 8 strands
- Pulling connection: one eye, plastic-coated
- Breaking load: 1,800 to 10,000 daN
- Weight: 0.48 to 2.45 kg
- Country of origin: Italy
Cable diameter · breaking load, working length, overall length:
Product No.:
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: On demand On demand
(abroad may vary)
Cable pulling grip, steel, single eye, PVC-coated: Show product
Low-twist braided steel cable pulling grip, single eye without thimble
NEW
Cable pulling grip, steel, low-twist braided, single eye without thimble
With its non-rotating, low-twist steel weave, this cable pulling grip connects the cable end to the pulling rope through a single eye without a protective metal insert.

- Material: steel
- Cable diameter: 15 to 100 mm
- Overall length 1,000 to 1,900 mm
- Working length 700 to 1,400 mm
- Single eye without thimble
- Breaking load: 3,000 to 16,000 daN
- Non-rotating, low-twist braid
- Made in Italy
Cable diameter · breaking load, working length, overall length:
Product No.:
Price on requestRequest a quote ›
Cable pulling grip, steel, low-twist braided, single eye without thimble: Show product
Steel cable pulling grip with swivelling connector
NEW
Cable pulling grip, steel, with swivelling connector
Steel cable pulling grip with swivelling connector for cables from 15 to 100 mm; under tension the wire mesh tightens around the cable sheath and transfers the pulling force to the cable.

- Cable diameter: 15 to 100 mm
- Overall length 900 to 1,500 mm
- Working length 700 to 1,200 mm
- Breaking load: 5,000 to 10,000 daN, depending on size
- Wire ø 2.00 mm on every size
- Weight 2.7 to 3.9 kg
- 5 to 7 strands
- Made in Italy
Cable diameter · breaking load and working length:
Product No.:
Price on requestRequest a quote ›
Cable pulling grip, steel, with swivelling connector: Show product
Steel underwater cable pulling grip, single eye
NEW
Underwater cable pulling grip, steel, single eye
For underwater cable installation through a single attachment eye, this steel pulling grip is available for cable diameters from 65 to 220 mm.

- Cable diameter: 65 to 220 mm, depending on variant
- Overall length 2,600 to 5,100 mm
- Working length 2,300 to 4,500 mm
- Breaking load: 25,000 to 110,000 daN, depending on size
- Made in Italy
Cable diameter · breaking load, working length, overall length:
Product No.:
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: On demand On demand
(abroad may vary)
Underwater cable pulling grip, steel, single eye: Show product
1 to 20 (from a total of 34)

The breaking load and further data for each size are shown in the selection field of each product.

Frequently asked questions

General1
Who are the products intended for?
Our range is aimed at specialist companies and organisations in the utilities and civil-engineering sector – including municipal utilities, water suppliers, energy utilities (EVU), construction companies, municipalities, telecommunications companies, engineering offices and technical service providers.
Was this helpful?Thanks for your feedback!
Orders & Shipping12
Can I place an order by phone? Can I order by phone? Ordering by phone
Yes, you can also order by phone. Call us at +43 (0) 2252 53169 (Mon–Thu 08:00–17:00, Fri 08:00–12:00) and our team will be happy to take your order.
Was this helpful?Thanks for your feedback!
What delivery time can I expect?
The delivery time shown for each item applies; our shipping and payment terms also list the usual times per country. Delivery times are not binding unless we have expressly confirmed a date as binding in writing (e-mail is sufficient). Express shipping is available on request.
Was this helpful?Thanks for your feedback!
Can I order as a private individual?
SEMPERDEAL is intended exclusively for commercial (business) customers. Unfortunately, private individuals cannot register or open an account.
Was this helpful?Thanks for your feedback!
What should I do if I received the wrong item?
If you ever receive the wrong item, please let us know immediately – by email to kontakt@semperdeal.com, including your order number and a photo of the delivery. We'll then arrange an exchange right away.
Was this helpful?Thanks for your feedback!
Can I cancel an order?
Yes. As long as your order has not yet been shipped, you can cancel it. Please contact us as soon as possible by email at kontakt@semperdeal.com or by phone at +43 (0) 2252 53169.
Was this helpful?Thanks for your feedback!
How do I change my delivery address?
You can enter a different delivery address during checkout. For changes after ordering, contact us before dispatch: kontakt@semperdeal.com
Was this helpful?Thanks for your feedback!
Which countries do you ship to?
We deliver to all EU countries and to Switzerland. Delivery to other countries is available on request – simply contact us at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
How do I see whether an item is available?
Availability is shown directly on the respective product page. If an item is marked "on request", we'll be happy to tell you the current delivery time at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Are bulk or large orders possible?
Bulk orders are always welcome. For larger volumes we're happy to offer a quantity discount – simply request your quote at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Do you offer express shipping?
Yes, express shipping is available on request. We'll gladly let you know the options and costs – just call us at +43 (0) 2252 53169 or email kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
How can I check the status of my order?
You can check the current status of your order at any time in your customer account once you are logged in. If you have any questions, please contact us – ideally with your order number – at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
How do I place an order?
It's easy: select the product you want in our online shop, add it to your cart and complete the checkout. Just follow the steps for shipping and payment – you'll then receive an order confirmation by email. Of course, we're also happy to take your order personally: write to us at kontakt@semperdeal.com or give us a call.
Was this helpful?Thanks for your feedback!
Payment & Invoicing4
Can I buy on account?
Purchase on account is available to registered B2B customers following a successful credit check. To have it activated, simply contact us at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Do you offer leasing or financing?
For selected devices we offer leasing and financing options. We'll be happy to discuss the details and suitable terms with you: kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
What happens if an invoice is overdue?
If an invoice is overdue, you'll first receive a friendly payment reminder. For questions about open items, contact us at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Which payment methods do you offer?
The available payment methods are advance payment (bank transfer), instant bank transfer (Sofort) and purchase on account. Purchase on account is reserved for registered B2B customers following a successful credit check. Leasing/financing is available on request: kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Prices & Discounts4
How can I see the prices?
As a B2B shop, we display our prices in the customer area after you log in. All prices are net, plus VAT. For selected products, prices are also visible without logging in – i.e. for guests. For special conditions, please contact us at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Do you offer used or demo devices?
From time to time we offer tested used and demo devices. As availability varies, it's best to ask us directly about current offers: kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Are there quantity discounts or graduated prices?
Yes. Depending on the product and order quantity, quantity discounts and graduated prices are possible. We'll be happy to prepare your individual quote: kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Do you offer project pricing or framework agreements?
For large projects we offer individual project pricing and framework agreements. Just tell us about your project – we'll prepare a tailored offer for you: kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Account & Registration1
How long does account activation take?
Your B2B account is activated after a brief review, usually within one business day. If it ever takes longer, feel free to contact us at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Returns & Warranty2
Can I return or exchange products?
No. SEMPERDEAL sells to businesses only; there is no right of withdrawal or return, not even for unused goods in their original packaging. If goods are defective or we have delivered the wrong item, please notify us without delay after delivery at kontakt@semperdeal.com; we will then tell you how to proceed. Please never send goods back unannounced.
Was this helpful?Thanks for your feedback!
What should I do if the goods arrive damaged?
Please document any transport damage immediately with photos and report it within 24 hours to kontakt@semperdeal.com. That way we can process the damage quickly for you.
Was this helpful?Thanks for your feedback!
Technical Consulting1
Which device is right for my application?
We're happy to help. Just describe your application and we'll recommend the right device for you. You can reach us by email at kontakt@semperdeal.com, via chat, or by phone at +43 (0) 2252 53169.
Was this helpful?Thanks for your feedback!

No matching answer found

Try different wording – or ask us your question below.

Question not found?

Ask us directly — we answer personally.

Thank you! We will get back to you soon.
Sending failed. Please try again later.