Skip to content

Special-purpose pulling grips

Special-purpose pulling grips cover jobs a standard grip cannot handle: joining grips connect two cable ends, safety grips with two eyes secure the pull on high-pressure lines, and protective and special designs offer PVC-protected eyes, laterally open mesh, swivelling connectors or low-twist braiding. There are also grips in stainless steel or synthetic fibre and grips for laying underwater cables. Choose by task, cable diameter and eye design. The pulling and safety grips hang on the pulling rope by an eye or thimble like the industrial grips; the joining grips couple two cable ends, and the protective grip protects compressed-air hoses against wear. Together they cover cables up to 240 mm and breaking loads up to 110,000 daN.

Steel underwater cable pulling grip, laterally open
NEW
The laterally open steel mesh of this underwater cable pulling grip can be fitted around cables from 65 to 220 mm in diameter and pulled through two eyes.

- Cable diameter: 65 to 220 mm, depending on variant
- Overall length 2,700 to 5,200 mm
- Working length 2,300 to 4,500 mm
- Breaking load: 25,000 to 110,000 daN, depending on size
- Made in Italy
Cable diameter · breaking load and working length:
Product No.:
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: On demand On demand
(abroad may vary)
Steel underwater cable pulling grip, two eyes
NEW
A three-part weave and two attachment eyes define this steel pulling grip for laying underwater cables from 65 to 220 mm in diameter.

- Closed three-part mesh
- Cable diameter: 65 to 220 mm, depending on variant
- Two eyes without thimbles
- Overall length 2,700 to 5,200 mm
- Working length 2,300 to 4,500 mm
- Breaking load: 25,000 to 110,000 daN
- Made in Italy
Cable diameter · breaking load, working length:
Product No.:
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: On demand On demand
(abroad may vary)
Steel cable pulling grip, two eyes, Rilsan®-coated
NEW
The cable pulling grip connects the cable end to the pulling rope through two Rilsan®-coated eyes so that the cable can be pulled into place.

- Material: steel
- Cable diameter: 10 to 50 mm
- Pulling connection: two eyes
- Eye coating: Rilsan®
- Breaking load: 1,500 to 2,200 daN
- Country of origin: Italy
- Application: cable pulling
Cable diameter · breaking load, working length, overall length:
Product No.:
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: On demand On demand
(abroad may vary)
Steel cable pulling grip, single eye, Rilsan®-coated
NEW
To pull the cable into place, the steel mesh holds its free end while the pulling rope pulls on the single Rilsan®-coated eye.

- Material: steel
- Cable diameter: 10 to 50 mm
- Pulling connection: one eye
- Eye coating: Rilsan®
- Breaking load: 1,500 to 2,200 daN
- Country of origin: Italy
- Application: cable pulling
Cable diameter · breaking load, working length, overall length:
Product No.:
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: On demand On demand
(abroad may vary)
Steel cable pulling grip with closable eye
NEW
The closable eye on this steel pulling grip accepts the pulling rope before being closed, for installing cables with diameters from 15 to 60 mm.

- Cable diameter: 15 to 60 mm, depending on variant
- Overall length 700 to 1,000 mm
- Working length 500 to 700 mm
- Breaking load: 1,000 to 2,200 daN, depending on size
- Made in Italy
Cable diameter · breaking load, working length, overall length:
Product No.:
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: On demand On demand
(abroad may vary)
Reinforced steel underwater cable pulling grip, single eye
NEW
The reinforced construction of this steel pulling grip connects underwater cables from 65 to 150 mm in diameter to the pulling rope through a single eye.

- Cable diameter: 65 to 150 mm, depending on variant
- Overall length 3,000 to 4,500 mm
- Working length 2,600 to 4,000 mm
- Breaking load: 40,000 to 90,000 daN, depending on size
- Made in Italy
Cable diameter · breaking load, working length, overall length:
Product No.:
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: On demand On demand
(abroad may vary)
Reinforced steel underwater cable pulling grip, laterally open
NEW
This steel grip for underwater cables from 65 to 150 mm combines side fitting with a reinforced construction and is pulled through two eyes.

- Material: steel
- Cable diameter: 65 to 150 mm
- Pulling connection: two eyes
- Breaking load: 40,000 to 90,000 daN
- Reinforced design
- Laterally open design
- Country of origin: Italy
- Application: underwater cable pulling
- With two lacing wires
Cable diameter · version, breaking load, working length:
Product No.:
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: On demand On demand
(abroad may vary)
Reinforced steel underwater cable pulling grip, two eyes
NEW
The reinforced three-part construction of this steel grip is intended for underwater cable pulling through two eyes, covering diameters from 65 to 150 mm.

- Material: steel
- Cable diameter: 65 to 150 mm
- Pulling connection: two eyes
- Breaking load: 40,000 to 90,000 daN
- Reinforced design
- Three-part construction
- Country of origin: Italy
- Application: underwater cable pulling
Cable diameter · breaking load, working length:
Product No.:
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: On demand On demand
(abroad may vary)
Steel cable pulling grip for conductors with square cross-section
NEW
Cable pulling grip of steel wire with a single eye for pulling elements of square section from 40 × 40 to 100 × 100 mm.

- Cross-section: 40 × 40 to 100 × 100 mm
- Overall length 1,000 to 1,600 mm
- Working length 800 to 1,300 mm
- Breaking load: 4,500 to 13,000 daN, depending on size
- Made in Italy
Cross-section · breaking load, overall length, working length, strands:
Steel protective sleeve for compressed-air hoses
NEW
Steel mesh protective sleeve that is pulled over compressed-air hoses of 25.5 to 121 mm and protects them against wear; lengths 5, 8 or 10 m.

- Diameter 25.50 to 121.0 mm, equal to 1″ to 4.75″
- Overall length 5,000, 8,000 or 10,000 mm
- Breaking load 3,500 to 15,000 daN
- Wire ø 1.25 or 1.50 mm
- Hand-made
Diameter · overall length, breaking load and wire ø:
Steel safety pulling grip with thimbles for high-pressure lines
NEW
Two metal-lined eyes distinguish this steel safety grip for high-pressure lines with diameters from 10 to 60 mm.

- Material: steel
- Line diameter: 10 to 60 mm
- Pulling connection: two eyes
- Eyes with protective metal inserts
- Breaking load: 1,400 to 3,000 daN
- Country of origin: Italy
- Application: high-pressure lines
Line diameter · breaking load and number of strands:
Product No.:
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: On demand On demand
(abroad may vary)
Steel safety pulling grip without thimbles for high-pressure lines
NEW
Without metal inserts in either eye, this steel safety grip is designed for high-pressure lines with diameters from 10 to 60 mm.

- Braided by hand
- Line diameter 10 to 60 mm
- Overall length 800 mm
- Working length 600 mm
- Breaking load 1,400 to 3,000 daN
- Version: for high-pressure lines
- Wire ø 1.5 mm
- Eye 4 x 50 mm (10–15 mm), otherwise 5 x 50 mm
Line diameter · breaking load and weight:
Product No.:
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: On demand On demand
(abroad may vary)
Reinforced steel safety pulling grip with thimbles for high-pressure lines
NEW
Reinforced steel safety grip for high-pressure lines from 25 to 105 mm, whose two eyes carry thimbles as a metal insert against chafing.

- Material: steel
- Wire dia. 2.0 mm
- Line diameter: 25 to 105 mm
- Overall length 1,050 to 1,500 mm
- Working length 800 to 1,200 mm
- 6 to 10 strands
- Two eyes with thimbles
- Breaking load: 7,000 to 15,000 daN
- Weight: 1.10 to 2.70 kg
- Country of origin: Italy
Line diameter · breaking load, working length:
Product No.:
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: On demand On demand
(abroad may vary)
Steel cable pulling grip with two eyes, PVC-coated
NEW
Braided from PVC-coated steel strands, this cable pulling grip holds the cable end and is connected to the pulling rope by two plastic-coated eyes.

- Material: steel strands with PVC coating
- Cable diameter: 15 to 120 mm
- Overall length 1,100 to 1,850 mm
- Working length 800 to 1,500 mm
- Wire dia. 3.0 mm
- 5 to 8 strands
- Pulling connection: two eyes, plastic-coated
- Breaking load: 1,800 to 10,000 daN
- Weight: 0.63 to 2.80 kg
- Country of origin: Italy
Cable diameter · breaking load, working length, overall length:
Product No.:
Prices are visible to registered users only.
plus 20% tax excl. Shipping costs
Shippingtime: On demand On demand
(abroad may vary)
21 to 34 (from a total of 34)

The breaking load and further data for each size are shown in the selection field of each product.

Frequently asked questions

General1
Who are the products intended for?
Our range is aimed at specialist companies and organisations in the utilities and civil-engineering sector – including municipal utilities, water suppliers, energy utilities (EVU), construction companies, municipalities, telecommunications companies, engineering offices and technical service providers.
Was this helpful?Thanks for your feedback!
Orders & Shipping12
Can I place an order by phone? Can I order by phone? Ordering by phone
Yes, you can also order by phone. Call us at +43 (0) 2252 53169 (Mon–Thu 08:00–17:00, Fri 08:00–12:00) and our team will be happy to take your order.
Was this helpful?Thanks for your feedback!
What delivery time can I expect?
The delivery time shown for each item applies; our shipping and payment terms also list the usual times per country. Delivery times are not binding unless we have expressly confirmed a date as binding in writing (e-mail is sufficient). Express shipping is available on request.
Was this helpful?Thanks for your feedback!
Can I order as a private individual?
SEMPERDEAL is intended exclusively for commercial (business) customers. Unfortunately, private individuals cannot register or open an account.
Was this helpful?Thanks for your feedback!
What should I do if I received the wrong item?
If you ever receive the wrong item, please let us know immediately – by email to kontakt@semperdeal.com, including your order number and a photo of the delivery. We'll then arrange an exchange right away.
Was this helpful?Thanks for your feedback!
Can I cancel an order?
Yes. As long as your order has not yet been shipped, you can cancel it. Please contact us as soon as possible by email at kontakt@semperdeal.com or by phone at +43 (0) 2252 53169.
Was this helpful?Thanks for your feedback!
How do I change my delivery address?
You can enter a different delivery address during checkout. For changes after ordering, contact us before dispatch: kontakt@semperdeal.com
Was this helpful?Thanks for your feedback!
Which countries do you ship to?
We deliver to all EU countries and to Switzerland. Delivery to other countries is available on request – simply contact us at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
How do I see whether an item is available?
Availability is shown directly on the respective product page. If an item is marked "on request", we'll be happy to tell you the current delivery time at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Are bulk or large orders possible?
Bulk orders are always welcome. For larger volumes we're happy to offer a quantity discount – simply request your quote at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Do you offer express shipping?
Yes, express shipping is available on request. We'll gladly let you know the options and costs – just call us at +43 (0) 2252 53169 or email kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
How can I check the status of my order?
You can check the current status of your order at any time in your customer account once you are logged in. If you have any questions, please contact us – ideally with your order number – at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
How do I place an order?
It's easy: select the product you want in our online shop, add it to your cart and complete the checkout. Just follow the steps for shipping and payment – you'll then receive an order confirmation by email. Of course, we're also happy to take your order personally: write to us at kontakt@semperdeal.com or give us a call.
Was this helpful?Thanks for your feedback!
Payment & Invoicing4
Can I buy on account?
Purchase on account is available to registered B2B customers following a successful credit check. To have it activated, simply contact us at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Do you offer leasing or financing?
For selected devices we offer leasing and financing options. We'll be happy to discuss the details and suitable terms with you: kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
What happens if an invoice is overdue?
If an invoice is overdue, you'll first receive a friendly payment reminder. For questions about open items, contact us at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Which payment methods do you offer?
The available payment methods are advance payment (bank transfer), instant bank transfer (Sofort) and purchase on account. Purchase on account is reserved for registered B2B customers following a successful credit check. Leasing/financing is available on request: kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Prices & Discounts4
How can I see the prices?
As a B2B shop, we display our prices in the customer area after you log in. All prices are net, plus VAT. For selected products, prices are also visible without logging in – i.e. for guests. For special conditions, please contact us at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Do you offer used or demo devices?
From time to time we offer tested used and demo devices. As availability varies, it's best to ask us directly about current offers: kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Are there quantity discounts or graduated prices?
Yes. Depending on the product and order quantity, quantity discounts and graduated prices are possible. We'll be happy to prepare your individual quote: kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Do you offer project pricing or framework agreements?
For large projects we offer individual project pricing and framework agreements. Just tell us about your project – we'll prepare a tailored offer for you: kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Account & Registration1
How long does account activation take?
Your B2B account is activated after a brief review, usually within one business day. If it ever takes longer, feel free to contact us at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Returns & Warranty2
Can I return or exchange products?
No. SEMPERDEAL sells to businesses only; there is no right of withdrawal or return, not even for unused goods in their original packaging. If goods are defective or we have delivered the wrong item, please notify us without delay after delivery at kontakt@semperdeal.com; we will then tell you how to proceed. Please never send goods back unannounced.
Was this helpful?Thanks for your feedback!
What should I do if the goods arrive damaged?
Please document any transport damage immediately with photos and report it within 24 hours to kontakt@semperdeal.com. That way we can process the damage quickly for you.
Was this helpful?Thanks for your feedback!
Technical Consulting1
Which device is right for my application?
We're happy to help. Just describe your application and we'll recommend the right device for you. You can reach us by email at kontakt@semperdeal.com, via chat, or by phone at +43 (0) 2252 53169.
Was this helpful?Thanks for your feedback!

No matching answer found

Try different wording – or ask us your question below.

Question not found?

Ask us directly — we answer personally.

Thank you! We will get back to you soon.
Sending failed. Please try again later.