Skip to content
Hexagonal blue 100 to 150 mm parachute for line blowing device with black webbing edge and metal eyelets
Detail view of parachute for line blowing device, metal eyelet in black webbing with attached pull cord
Close-up of galvanised rope thimble with crimped sleeve and pull cords of the line blowing parachute
Blue parachute for line blowing device deployed inside a transparent pipe during use
Preview: Hexagonal blue 100 to 150 mm parachute for line blowing device with black webbing edge and metal eyelets
Preview: Detail view of parachute for line blowing device, metal eyelet in black webbing with attached pull cord
Preview: Close-up of galvanised rope thimble with crimped sleeve and pull cords of the line blowing parachute
Preview: Blue parachute for line blowing device deployed inside a transparent pipe during use
Parachute for inner pipe ø 100–150 mm
Hexagonal blue 100 to 150 mm parachute for line blowing device with black webbing edge and metal eyelets
Detail view of parachute for line blowing device, metal eyelet in black webbing with attached pull cord
Close-up of galvanised rope thimble with crimped sleeve and pull cords of the line blowing parachute
Blue parachute for line blowing device deployed inside a transparent pipe during use
Mobile Preview: Hexagonal blue 100 to 150 mm parachute for line blowing device with black webbing edge and metal eyelets
Mobile Preview: Detail view of parachute for line blowing device, metal eyelet in black webbing with attached pull cord
Mobile Preview: Close-up of galvanised rope thimble with crimped sleeve and pull cords of the line blowing parachute
Mobile Preview: Blue parachute for line blowing device deployed inside a transparent pipe during use

Parachute for inner pipe ø 100–150 mm

Product No.:
100153
Shipping time:
5-15 working days 5-15 working days (abroad may vary)
Sold and shipped by:
CfT Group GmbH – seller profile, from Traiskirchen warehouse (AT)
Country of manufacturer:
Switzerland
Commodity code:
59119099
Manufacturer:
Zeitler – show manufacturer's address
ZEITLER AG
Sonnhalde 7
6206 Neuenkirch
Schweiz
Email: info@zeitler.swiss

plus 20% tax excl. Shipping costs Transport insurance per parcel according to goods value, included in the shipping costs.

Product question
Description

Parachute for inner pipes, ø 100 to 150 mm
– spare part

The inner pipe parachute (ø 100 to 150 mm) is designed for use in pipes with an internal diameter of 100 to 150 mm. It is a practical accessory for safely inserting pull cords even when conventional methods reach their limits.

Area of application

If it is not possible to use a shuttle – for example, because the pipe is kinked or blocked – the pull cord can be blown in using the parachute. This ensures that the pull cord can still be inserted even in difficult sections of pipe.

Your benefits at a glance

  • Suitable for pipes with an internal diameter of 100 to 150 mm
  • An alternative when the use of a shuttle is not possible
  • Blowing the pull cord into kinked or blocked pipes
  • A practical spare part for your application
Technical data
Technical data
FeatureValue
Duct inner diameter100 to 150 mm
Colourblue
ApplicationIf a shuttle cannot be used (pipe kinked/blocked), the pull cord can be blown in using the parachute.

Accessories & spare parts

Round black foam attachment with 200 mm diameter and central opening
Foam insert (ø 170 mm)
Foam attachment ø 170 mm as an optional accessory for the EZ100.

- larger foam surface for better sealing with internal pipe diameters of approx. 130 to 150 mm and above
- thus makes blowing in the pull line easier
Prices are visible to registered users only.
Shippingtime: 5-7 working days
Foam insert (ø 170 mm): Show product
Dark foam ring with orange carrier disc and round centre opening for mounting on the device
Foam ring with support disc
Foam ring with support disc as a spare part for the EZ100.

- diameter ø 140 mm
- for the EZ100 with interchangeable front
Prices are visible to registered users only.
Shippingtime: 5-15 working days
Foam ring with support disc: Show product
Flat black foam ring, 140 mm in diameter, with a central opening
Foam ring ø 140mm
Foam ring ø 140 mm as a spare part, suitable for the EZ100 and EZ300.

- an intact foam front provides a better seal
- makes it easier to blow in the special cord
Prices are visible to registered users only.
Shippingtime: 5-15 working days
Foam ring ø 140mm: Show product
Ball-shaped skid Skid Ball 66 made of black plastic with large opening for the camera head and a side screw
Push aid for DN 100–150
The push aid is a centring aid for adapting the pipe camera to a larger pipe dimension.

- For the P540c push camera system with 50 mm camera head
- Diameter: 66 mm
- Suitable for pipe dimensions from 100 to 150 mm
- Protects the camera head and lifts it when there are deposits on the pipe invert
Prices are visible to registered users only.
Shippingtime: 5-15 working days
Push aid for DN 100–150: Show product
Yellow roller skid for DN 100 to 150 with black rubber rollers for centring the camera head in the pipe
Trolley for DN 100–150
The trolley is used to push the push rod far into a pipe system whilst keeping it centred.

- For the P540c push-rod camera system with 25 mm FlexiSonde and/or FlexiFeder
- Mounted on the 25 mm FlexiSonde or FlexiFeder, independent of the camera head
- Suitable for pipe dimensions from 100 to 150 mm
Prices are visible to registered users only.
Shippingtime: 5-15 working days
Trolley for DN 100–150: Show product

More from this range

Green 60 to 100 mm parachute for cord blowing device with black edging, metal eyelets and attachment cords
Parachute for inner pipe ø 60–100 mm
Parachute as a spare part for blowing the pull cord into pipes with an internal diameter of 60 to 100 mm.

- for blowing in when a shuttle cannot be used (pipe kinked or blocked)
- colour: green
Prices are visible to registered users only.
Shippingtime: 5-15 working days
Parachute for inner pipe ø 60–100 mm: Show product
Hexagonal neon yellow parachute for a line blowing device with black edging and retaining lines on eyelets
Parachute for inner pipe ø 30–60 mm
Parachute as a spare part for blowing the pull cord into pipes with an internal diameter of 30 to 60 mm.

- for blowing in when a shuttle cannot be used (pipe kinked or blocked)
- colour: yellow
Prices are visible to registered users only.
Shippingtime: 5-15 working days
Parachute for inner pipe ø 30–60 mm: Show product
Red hexagonal 150 to 200 mm parachute for line blowing device with black webbing edge and wire loops at the corners
Parachute for inner pipe ø 150-200 mm
Parachute as a spare part for blowing the pull cord into pipes with an internal diameter of 150 to 200 mm.

- for blowing in when a shuttle cannot be used (pipe kinked or blocked)
- colour: red
Prices are visible to registered users only.
Shippingtime: 5-15 working days
Parachute for inner pipe ø 150-200 mm: Show product
High-pressure parachute for pipe Ø 150–200 mm (neon)
High-pressure parachute for pipe Ø 150–200...
Zeitler high-pressure blow-in parachute in neon for ducts with an internal diameter of 150 to 200 mm.

- for compressor applications and blowing in pull lines
- durable, hard-wearing fabric for high-pressure loads
- can be pulled back if problems occur
- not intended for cleaning pipes or expelling water
Prices are visible to registered users only.
Shippingtime: 5-15 working days
High-pressure parachute for pipe Ø 150–200 mm (neon): Show product
High-pressure parachute for internal pipes ø 30–60 mm
High-pressure parachute for internal pipes...
Neon high-pressure parachute for pipes with an internal diameter of 30 to 60 mm.

- for blowing-in work using compressors from 2 bar
- robust, hard-wearing and abrasion-resistant material
- alternative to the blowing-in shuttle if a shuttle cannot be used because of a kinked, deformed or blocked pipe
- not intended for cleaning pipes or expelling water
- weight approx. 0.04 kg
Prices are visible to registered users only.
Shippingtime: 5-15 working days
High-pressure parachute for internal pipes ø 30–60 mm: Show product
High-pressure parachute for pipes with 60 to 100 mm (neon)
High-pressure parachute for pipes with 60–100...
Zeitler high-pressure blow-in parachute in neon for ducts with an internal diameter of 60 to 100 mm.

- suitable for compressor applications from 2 bar
- for blowing in pull lines
- alternative when a shuttle cannot be used
Prices are visible to registered users only.
Shippingtime: 5-15 working days
High-pressure parachute for pipes with 60–100 mm (neon): Show product
High-pressure parachute for pipe Ø 100–150 mm (neon)
High-pressure parachute for pipe Ø 100–150...
Zeitler high-pressure parachute in neon for ducts with an internal diameter of 100 to 150 mm.

- for blowing in pull lines or steel ropes using a compressor
- operating pressure from 2 bar
- extremely durable and wear-resistant material
Prices are visible to registered users only.
Shippingtime: 5-15 working days
High-pressure parachute for pipe Ø 100–150 mm (neon): Show product
Zeitler low-pressure shuttle complete set 1 to 7½ inch in a mini case with black and white shuttle discs and two axles
Low Pressure Shuttle Complete Set 1–7½ inch...
Ejects water, loose dirt and small parts from ducts, calibrates them and lays the cable pull line in the same operation.

- 1 mini case
- 4 shuttle disks black
- 4 shuttle disks white
- 2 axles
- Diameter selectable as option from 1 to 7½ inch
- Zeitler low pressure shuttle system
Prices are visible to registered users only.
Shippingtime: 5-15 working days
Low Pressure Shuttle Complete Set 1–7½ inch: Show product

Frequently asked questions

Repair & Service0
Do you offer calibration?

As an official service point, we offer calibration for cable locators, leak detection and measuring devices. For a large proportion of the devices sold on the market, we issue corresponding certificates. You'll find more information on our Service & Repairs page and at service@cft.at.

Was this helpful?Thanks for your feedback!
Can I get a loan device during the repair?
On request, we'll provide you with a loan device during the repair – at our standard rental rates. We'll be happy to clarify availability and details with you: kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Who do I contact for technical problems?
Our support team is happy to help with technical problems. Write to us at kontakt@semperdeal.com and include the device type, the exact error message and – if possible – a photo. That way we can help you quickly and specifically.
Was this helpful?Thanks for your feedback!
Do you offer repairs?

Yes, we offer repair services for most of the appliances in our range. Please submit a repair request directly via our repair request form or contact us at kontakt@semperdeal.com.

Was this helpful?Thanks for your feedback!
How much does a repair cost?
Po otrzymaniu Twojego urządzenia przygotujemy kosztorys. Naprawa jest wykonywana dopiero po Twojej akceptacji. Ewentualną opłatę diagnostyczną podamy na zapytanie: kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Do you offer an on-site service?
Yes. In Austria and Germany we offer an on-site service – from installation and instruction through to repair. Please arrange appointments at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Prices & Discounts0
How can I see the prices?
As a B2B shop, we display our prices in the customer area after you log in. All prices are net, plus VAT. For selected products, prices are also visible without logging in – i.e. for guests. For special conditions, please contact us at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Do you offer used or demo devices?
From time to time we offer tested used and demo devices. As availability varies, it's best to ask us directly about current offers: kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Are there quantity discounts or graduated prices?
Yes. Depending on the product and order quantity, quantity discounts and graduated prices are possible. We'll be happy to prepare your individual quote: kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Do you offer project pricing or framework agreements?
For large projects we offer individual project pricing and framework agreements. Just tell us about your project – we'll prepare a tailored offer for you: kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Datasheets & Downloads0
Is a user manual included?
Yes, the appropriate user manual is included with every device. You'll also find the manual on the respective product page in the "Downloads & Media" section. We'll gladly provide a digital version by email on request as well: kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Where can I find software or apps for the devices?
You can obtain the software and apps for the devices from the respective manufacturers' websites. In addition, you'll find all software solutions from the individual manufacturers and products bundled in our "Software" section. If you have any questions about installation, we're happy to help: kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Where can I find technical data sheets?
You'll find the technical data sheets directly on the respective product page in the "Downloads & Media" section. If you can't find a particular data sheet, we'll be happy to send it to you by email: kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Returns & Warranty0
Can I return or exchange products?
No. SEMPERDEAL sells to businesses only; there is no right of withdrawal or return, not even for unused goods in their original packaging. If goods are defective or we have delivered the wrong item, please notify us without delay after delivery at kontakt@semperdeal.com; we will then tell you how to proceed. Please never send goods back unannounced.
Was this helpful?Thanks for your feedback!
What should I do if the goods arrive damaged?
Please document any transport damage immediately with photos and report it within 24 hours to kontakt@semperdeal.com. That way we can process the damage quickly for you.
Was this helpful?Thanks for your feedback!
Training Courses0
Can I book training for a device I already own?
Yes. Training can also be booked for devices you already own – regardless of whether you purchased them from us. We also offer refresher courses. Simply contact us at kontakt@semperdeal.com.
Was this helpful?Thanks for your feedback!
Technical Consulting8
Which device is right for my application?
We're happy to help. Just describe your application and we'll recommend the right device for you. You can reach us by email at kontakt@semperdeal.com, via chat, or by phone at +43 (0) 2252 53169.
Was this helpful?Thanks for your feedback!
Is the EZ50 cord-blowing machine suitable for pipes in coiled form?Zeitler

No, the EZ50 cord-blowing machine is not suitable for this application.
For pipes in coiled form, we recommend the EZ15 cord-blowing machine.

Was this helpful?Thanks for your feedback!
Which front attachments with an integrated side channel are available for the EZ380?Zeitler

The EZ380 cord-blowing machine is compatible with all three front attachments featuring side channels with diameters of 140 mm, 200 mm and 320 mm.

Was this helpful?Thanks for your feedback!
What are the advantages of using blow-in shuttles?Zeitler

Our blow-in shuttles (blow-in pistons) offer numerous advantages:

  • Insertion of cable pull cords and steel cables
  • Safe operation
  • Cleaning of pipes
  • Ejecting water
  • Calibration of pipes
  • Low friction surface
  • Reduced air consumption
  • Easy retraction
  • Simple maintenance
Was this helpful?Thanks for your feedback!
What are the key features of the innovative design of the blow-in shuttles?Zeitler

The design of our shuttles (injection pistons) not only minimises the friction surface area but also reduces the volume of air required, and they can be retracted easily.

Was this helpful?Thanks for your feedback!
What are the advantages of mechanical insertion devices over manual methods?Zeitler

Mechanical insertion tools save a great deal of time and energy and increase the efficiency of the installation process. They enable cables and fibre-optic rods to be inserted quickly, precisely and evenly, and are particularly useful for telecommunications installations, FTTx fibre-optic installations, and construction and infrastructure projects.

Was this helpful?Thanks for your feedback!
What types of rope can be blown into the EZ-SYSTEM-X?Zeitler

The blowing machine can blow in guide ropes, winch ropes, cable pull ropes and pull-through cords with a diameter of 1 to 8 mm.

Was this helpful?Thanks for your feedback!
Why are the cable guides available in brass and hardened steel?Zeitler

The brass version is suitable exclusively for feeding through cords and ropes.
The hardened steel rope guides are specifically designed for feeding through steel cables.

Was this helpful?Thanks for your feedback!
Which front attachments with an integrated side channel are available for the EZ300?Zeitler

Front attachments with diameters of 140 mm and 200 mm are available for the EZ300.

Was this helpful?Thanks for your feedback!

No matching answer found

Try different wording – or ask us your question below.

Question not found?

Ask us directly — we answer personally.

Thank you! We will get back to you soon.
Sending failed. Please try again later.
For more information, please visit the home page for this product.