Name: Rent GENNY4 transmitter for C.A.T4+ // gC.A.T4+ receiver
Brand: SEMPERDEAL MIETPARK
SKU: GENNY4-MIET
Price: 35.00 EUR
Availability: InStock

Main page » Equipment hire » Cable locating » Transmitters » Rent GENNY4 transmitter for C.A.T4+ // gC.A.T4+ receiver

Preview: Radiodetection Genny4 signal generator in grey and yellow, angled view with connection socket and yellow latch

Rent GENNY4 transmitter for C.A.T4+ // gC.A.T4+ receiver

Mobile Preview: Radiodetection Genny4 signal generator in grey and yellow, angled view with connection socket and yellow latch

Rental

Downloads & Media3 items · 3 categories

Description

Rent a GENNY4 transmitter

Easy to use – even without prior experience

Operation is straightforward: the transmitter and accessories can be deployed quickly and efficiently without requiring much experience. If required, we can also provide a chargeable equipment briefing.

The rental package consists of:

GENNY4 transmitter (frequencies 33 kHz and 131 kHz)
Direct connection set: ground spike, magnet and crocodile clips with cable (red/black)
Nylon equipment bag for the locating system

Safety information

Usage instructions

Have repairs carried out only by qualified specialists or the manufacturer's service.

Disposal

Waste electrical and electronic equipment must not be disposed of with unsorted waste (symbol: crossed-out wheeled bin); it is collected and recycled separately. This also applies to equipment used in a business. Hand in waste equipment at a collection point or to a waste management company, or send it back to us for disposal: CfT Group GmbH, Wiener Straße 99, 2514 Traiskirchen, Austria. We take care of the disposal.
If the equipment contains batteries or lamps, remove them before returning it, provided this is possible without destroying them, and return them separately. Tape the terminals of lithium batteries first.
If the equipment stores data (for example recordings, measurements or locations), delete any personal data before returning it. As the user, you are responsible for this.

Take-back and disposal: all details

Technical data

Technical data
Feature	Value
Direct connection mode	33 kHz (32768 Hz) and 131 kHz (131072 Hz), both signals transmitted simultaneously
Transmitter clamp mode	33 kHz (32768 Hz) and 131 kHz (131072 Hz), both signals transmitted simultaneously
Induction mode	33 kHz (32768 Hz)
Maximum output voltage	23 V RMS into an open circuit
Maximum output current	66 mA RMS into a short circuit
Maximum output power	1 watt in direct connection mode
Induction output	Magnetic flux density (B) 1.089 µT @ 500 mm
Output signal level	Selectable standard or Boost mode (transmitter always powers up in standard mode)
Current supply	Alkaline or NiMH, 4 x D type cells
Operating time	direct connection: 40 h in standard mode, 15 h in boost mode; induction: 28 h in standard mode, 9 h in boost mode
Housing	injection-moulded ABS plastic
Weight	2.75 kg (6 lbs) with batteries and tool tray fitted
Dimensions	27.5 cm (10.8") x 17 cm (6.7") x 20 cm (7.8")
Degree of protection (IP)	IP54
Speaker	Built-in water-resistant speaker
Operating temperature	-10 °C to 50 °C / 14 °F to 122 °F
Storage temperature	-40 °C to 70 °C / -40 °F to 158 °F
External connection	XLR type for connection of direct connection lead, transmitter clamp and accessories
Recommended service schedule	Annual; when hired, also at the beginning / end of the lease period

Accessories & spare parts

More from this range

Tx-10 signal transmitter for cable locating in a blue-grey housing with carrying handle, display and keypad

Rent the TX-10 transmitter for RD7XXX/8XXX...

Tx-10 induction transmitter for cable and line locating at 8 kHz and 33 kHz, matching Radiodetection’s RD7000, RD7100, RD8000 and RD8100 series precision receivers.

- Suitable for better identifying metal cable and pipe routes and determining route depths
- Further active frequencies can be enabled on request
- Operating modes: galvanic coupling, clamp or inductive mode (inductive typically effective down to a depth of 2 m)
- Max. power output 10 W, selectable 1, 2, 3, 5 and 10 W
- Protection rating IP65
- Galvanic connection set: ground stake, magnet and crocodile clips with cable (red/black)
- Nylon equipment bag for the locating system

from 89,00 EUR

plus 20% tax excl. Shipping costs

Shippingtime: 3-4 working days

Show product

Frequently asked questions – SEMPERDEAL MIETPARK

Repair & Service11

Do you offer calibration?

As an official service point, we offer calibration for cable locators, leak detection and measuring devices. For a large proportion of the devices sold on the market, we issue corresponding certificates. You'll find more information on our Service & Repairs page and at service@cft.at.