Main page » SEMPERDEAL MIETPARK

SEMPERDEAL RENTAL FLEET – Hire location equipment

SEMPERDEAL MIETPARK
https://www.semperdeal.com/shop/equipment-rental/

With the SEMPERDEAL rental fleet, you can use professional locating, leak-detection and inspection technology flexibly – rent instead of buy. Whether for individual projects, demand peaks, rarely needed specialist devices or to test before purchasing: you receive tested, ready-to-use equipment from our portfolio of leading brands, without having to invest in your own purchase and maintenance.

We advise you on the right equipment for your task, ensure short-term availability and, on request, provide instruction. We handle the service and maintenance of the rental units ourselves, so the technology performs reliably on site. Simply contact us about availability and terms.

S6 microsonde with black tip, flexible metal spring section and stainless steel body

Rent the S6 probe / microprobe (DM 6mm) 33kHz for water pipe location

S6 probe / microprobe for locating non-metallic pipes, particularly narrow pipes and fine water pipe systems, inserted into the pipe to be located using a locating snake or a fibreglass rod.

- Diameter 6 mm
- Frequency 33 kHz, signal range approx. 1.5 to 2 m
- Recommended receivers: C.A.T4+, SuperC.A.T4+ or RD7xxxx set to the 33 kHz probe reception mode
- Operating time approx. 10 hours at room temperature, 8 hours at 0 °C
- Minimum bend radius 130 mm
- Supplied with probe battery cell

Product No.: S6SOND-33K-MIET

from 19,00 EUR

plus 20% tax excl. Shipping costs

Shippingtime:

3-4 working days

Show product

Radiodetection Genny4 signal generator in grey and yellow, angled view with connection socket and yellow latch

Rent GENNY4 transmitter for C.A.T4+ // gC.A.T4+ receiver

GENNY4 induction transmitter for cable and line tracing at 33 kHz and 131 kHz, matching the C.A.T4+ and gC.A.T4+ receivers.

- Applies a signal to metal cable and pipe routes to identify their course and branches more easily and to determine route depths
- Maximum output power 1 W in direct connection mode
- Operating time with direct connection: 40 h in standard mode, 15 h in boost mode
- Direct connection set: ground spike, magnet and crocodile clips with cable (red/black)
- Nylon equipment bag for the locating system
- Chargeable equipment briefing available if required

Product No.: GENNY4-MIET

from 35,00 EUR

plus 20% tax excl. Shipping costs

Shippingtime:

3-4 working days

Show product

S18A sonde with black housing, stainless steel section and threaded connector lying on a light background

Hire the S18 probe / mini probe (dia. 18 mm) 33 kHz for pipe location

S18 probe / mini probe for locating non-metallic pipes, inserted into the pipe to be located using a locating snake or a fibreglass rod.

- Diameter 18 mm
- Standard probe for calibration pigs used to calibrate bundles of empty conduits for fibre-optic cable installation
- Frequency 33 kHz, located at the surface with the receiver set to 33 kHz
- Recommended receivers: SD200STD, C.A.T4+, gC.A.T4+, SuperC.A.T4+, RD7xxx
- Supplied with button cell battery

Product No.: S18SOND-33K-MIET

from 18,00 EUR

plus 20% tax excl. Shipping costs

Shippingtime:

3-4 working days

Show product

Tx-10 signal transmitter for cable locating in a blue-grey housing with carrying handle, display and keypad

Rent the TX-10 transmitter for RD7XXX/8XXX receivers

Tx-10 induction transmitter for cable and line locating at 8 kHz and 33 kHz, matching Radiodetection’s RD7000, RD7100, RD8000 and RD8100 series precision receivers.

- Suitable for better identifying metal cable and pipe routes and determining route depths
- Further active frequencies can be enabled on request
- Operating modes: galvanic coupling, clamp or inductive mode (inductive typically effective down to a depth of 2 m)
- Max. power output 10 W, selectable 1, 2, 3, 5 and 10 W
- Protection rating IP65
- Galvanic connection set: ground stake, magnet and crocodile clips with cable (red/black)
- Nylon equipment bag for the locating system

Product No.: TX10-MIET

from 89,00 EUR

plus 20% tax excl. Shipping costs

Shippingtime:

3-4 working days

Show product

Flexible Bendi sonde 512 Hz with two spring joints and stainless steel connection sleeve

Rent the Bendisonde (Ø 22 mm) 512 Hz for pipe location

Bendisonde for locating non-metallic pipes and, to a limited extent, cast iron pipes, inserted into the pipe to be located using a locating snake or a fibreglass rod.

- Diameter 22 mm
- Low-frequency 512 Hz signal, so cast iron pipes (particularly grey cast iron) can also be located to a limited extent
- 3-section sonde for improved flexibility around pipe and duct corners
- Connection: M10 male end cap
- Recommended receivers: RD7100DL or RD7200
- Supplied with AA battery

Product No.: BENSOND-512-MIET

Prices are visible to registered users only.

plus 20% tax excl. Shipping costs

Shippingtime:

3-4 working days

Show product

1 to 20 (from a total of 20)

Frequently asked questions – SEMPERDEAL MIETPARK

General1

Who are the products intended for?

Our range is aimed at specialist companies and organisations in the utilities and civil-engineering sector – including municipal utilities, water suppliers, energy utilities (EVU), construction companies, municipalities, telecommunications companies, engineering offices and technical service providers.